King Electric PAW Wall Heater
Our most popular heater for single-family homes and upmarket condominiums. Customers may adjust the heater to an area’s precise heating needs by using King’s patente Pic-A-Watt steel fin element, which allows them to choose from a variety of wattage possibilities. Ideal for big living spaces while being whisper quiet enough for bedrooms. The premium combination of a high-mass steel element and a whisper-quiet squirrel cage blower provides best-in-class performance and years of trouble-free operation. PAW has a five-year guarantee and a 30-plus year track record of dependability.
King’s exclusive Pic-A-Watt element means the heater can easily be tailored to a room’s specific heating requirements. For smaller areas, choose a lower wattage to efficiently heat the room. For larger rooms, choose a higher wattage and maximize comfort. It’s easy as unplugging a wire to select the wattage during installation.
The King Electric Paw Wall Heater Features:
- Original Pic-A-Watt Element
- Multiple wattage options, to tailor to a room’s specific heating requirements
- Patente Smart Limit Protection
- Whisper Quiet Squirrel Cage Blower
- Wall can w/ QuickSet stud tabs
- Proudly made in the USA
- 5 Year Warranty
The King Electric King Electric Paw Wall Heater Engineering Specs:
- Ratings: Heaters shall be available in wattages of 250 to 2,250 at 120, 208, 240, or 277 Volts.
- Blower and Motor: A whisper quiet tangential blower, delivering 75 CFM, shall be driven by a shadd pole, permanently lubricate, C-frame type motor with impedance protection and seale bearings. Motors shall be the same voltage as the heater.
- Elements: Element assemblies shall consist of three steel sheathe heating tubes in a furnace-braze, plate-finne, block design. Each sheathe tube shall contain coild Ni-Chrome wire embedde in an insulator of Magnesium Oxide. The element assembly shall provide up to seven (7) possible wattage configurations available for selection during field installation. The use of external resistors, diodes, or other weak links to obtain multiple wattages will not be acceptable.
- Thermal Overload: Heaters shall be equippd with King’s patented thermal overload Smart Limit Protection, which disconnects elements and motor in the event normal operating temperatures are exceede. If thermal overload trips due to abnormal operating temperatures, thermal overload shall remain open until manually reset by turning the heater off for 15 minutes. Automatic reset of thermal overloads, which allow the element to continue to cycle under abnormal conditions, will not be accepte.
- Grill: The grill shall be a louvre, one-piece design with roundd edges on all four sides, with roundd corners to prevent snags from contact with other materials. The grill shall be epoxy powder-coate in white or almond.
- Wall Can: The wall can shall be 20 gauge electro-galvanize steel and shall contain a minimum of three (3) knockouts. The wall can shall have a depth gauge indicator, and a factory installed, insulate and strande copper ground-wire. Minimum 4″ clearance to floors and 6″ sidewalls. Zero clearance to combustibles in the wall.
- Approvals: cULus (E41422)





Reviews
There are no reviews yet.