Drip Irrigation Pressure Regulators
Firstly, lots of water pressure is great when you’re taking a shower or washing the dishes. But it’s not so great when it comes to drip irrigation. Pressure that is excessive can damage a drip irrigation system.
Pressure regulators reduce incoming water pressure to a set pressure usable by a drip system. A pressure regulator is use when the incoming pressure is too high for the emitters or fittings. The flow rate of the regulator should be that of the system. Pressure regulation does not take effect until the minimum specifie flow passes through the regulator.
What pressure regulator do I need for drip irrigation?
Do I need a Pressure regulator for Drip Irrigation? Hills…
Regulators that offer 25 psi work best in most drip systems. However, if you’re using a thin-walle drip tape, you need a regulator with a maximum pressure of 15 psi to make sure that your drip tape lasts as long as possible.
What happens when a pressure regulator goes bad?
In a plumbing system, for example, a failed pressure regulator valve could result in excessively high water pressure, potentially causing damage to pipes, fixtures, and appliances. In an industrial setting, a faile pressure regulator valve could lead to unsafe operating conditions or damage to equipment. Drip Irrigation Pressure Regulators
Further, if you’re looking for a pressure regulator, drip irrigation solutions are available here at Farmhydrosupplies.com. To ensure the right rate of drip, pressure regulator choices include low-flow, medium-flow, and high-flow. Whether you’re looking for a 1 1/2-inch drip irrigation pressure regulator or something else, we can help you find what you’re searching for.
Pressure regulators should be place after valves or shutoffs. They may be damage if left under constant pressure, unless state otherwise in their product descriptions.
Drip Irrigation
Drip Irrigation
Drip Irrigation
Drip Irrigation
Drip Irrigation

