Across International SuperVac 21 CFM Corrosion-Resist 2-Stage Vacuum Pump – UL/CSA Certified
Multi-level gas ballast is designed to allow purposefully pulling a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull. It also helps keep moisture, solvent, and other contaminants from getting stuck in the pump and instead passing through to the exhaust.
It is important to note that pumps should always be run in a well-ventilated area.
The new corrosion-resistant Ai SuperVac 21 cfm commercial-grade hoover pumps are now UL/CSA certified (115V type), which is needed by many municipalities and offers a higher degree of equipment safety and longevity. These pumps are intended for long-term continuous operation and will reduce your equipment’s hoover to below 0.3 microns in minutes. All essential fittings are included, as well as a large-capacity exhaust oil mist filter, which returns trapped pump oil to the pump and makes the pump run more quietly.
Free high-capacity exhaust oil mist filter ($250 value), KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) are included.
Across International SuperVac 21 CFM Corrosion-Resist 2-Stage Vacuum Pump – UL/CSA Certified
Features
- UL 61010-1 and CSA C22.2 certified
- New corrosion-resistant design for durable operation in various environment
- Adjustable gas ballast
- Built-in oil back-flow prevention check valve
- Internal forced oil cycling system
- Integrated cylinder structure
- Exhaust filter with easy-to-change replaceable filter element
- Heavy duty structure and designed for reliable long time operation
- Low noise
- All necessary fittings and filter included for immediate use
- 2-year warranty
Product Specs:
| Electrical requirements | 115V or 220V switchable, 50/60Hz single phase, 370 watts |
| Pumping rate | 5.6 cfm |
| Ultimate vacuum without gas ballast | 0. 3 micron/millitorr |
| Ultimate vacuum with gas ballast | 6 micron/millitorr |
| Inlet/outlet connection | KF25/NW25 flange |
| Oil volume | 1 liter / 1.06 quart |
| Motor speed | 1450 rpm (50Hz) or 1720 rpm (60Hz) |
| Working temperature | 5 to 40°C |
| Unit dimensions (LxWxH) | 17 x 6.75 x 9.75″ or 17 x 6.75 x 16″ (with filter) |
| Shipping dimensions (LxWxH) | 23 x 8.5 x 13″ Across International SuperVac 21 CFM Corrosion-Resist 2-Stage Vacuum Pump – UL/CSA Certified |
| Unit weight | 47 Lb |
| Shipping weight | 55 Lb |
| Recommended oil | Ultragrade 19 |
| Noise level | < 56 dB |
| Warranty | Two years |
| Compliance | UL (E500328), CSA, CE |
Package includes
| Part description | Quantity |
| Ai SuperVac 5.6 cfm vacuum pump with exhaust oil mist filter | 1 set |
| Ai premium vacuum pump oil | 1 pc |
| KF25 flexible stainless steel vacuum bellow (3 ft) | 1 pc |
| KF25 wing nut flange quick clamp Across International SuperVac 21 CFM Corrosion-Resist 2-Stage Vacuum Pump – UL/CSA Certified | 2 pcs |
| KF25 flange centering ring | 2 pcs |
| User’s manual | 1 pc |
forthwith by the same token, nonetheless, neither for this purpose nor for this reason notwithstanding, from time to time
obviously given that occasionally these points are otherwise important to realize once in a while overall, in a word
particularly pug in addition Fourthly,
by the time further compared to furthermore, be that as it may generally coupled with
hence different from henceforth, due to however equally important i.e. even if identically, even more in truth in view of
most compelling evidence most important must be remembered not to mention now that of course on account of
on balance on the whole on this occasion only if owing to
point often overlooked prior to provided that seeing that so as to so far sooner or later such as
summing up take the case of
that is
that is to say
then again
this time
to be sure
to begin with











Joseph (verified owner) –
FarmHydroSupplies exceeded my expectations with their shipping services; the packaging was secure, and my hydroponic products arrived intact.
Aiden (verified owner) –
I’ve been a loyal customer of FarmHydroSupplies for years, and their shipping reliability is one of the main reasons I keep coming back.
Sebastian (verified owner) –
FarmHydroSupplies has earned my trust as a reliable supplier; their commitment to timely shipping and delivering exactly what I need has solidified my confidence in their brand.
Patrick (verified owner) –
FarmHydroSupplies has built a strong reputation for delivering products on time, intact, and without any hassles.
Joseph (verified owner) –
I have recommended FarmHydroSupplies to fellow hydroponic enthusiasts because their shipping reliability is second to none.
Timothy (verified owner) –
I appreciate the peace of mind that comes with ordering from FarmHydroSupplies; their reliable shipping allows me to focus on my gardening projects.