DIG 3/4 Inch Adjustable Pressure Regulator – Pack of 4
Specifications
- Dimensions: 4″ H x 3.44″ W (10 cm H x 19 cm W)
- Flow rates: .88 to 22 GPM (.2 to 5 m3/h)
- Pressure range: 12-60 PSI (.83-4.1 BAR)
- White color code: 12 to 35 PSI (.83 to 2.4 BAR) *Red color code: 28 to 60 PSI (1.9 to 4.1 BAR)
- Max. working pressure: 125 PSI (8.6 BAR)
- Weight: .75 lb (.34 kg)
- Temperature: Water up to 122°F (50°C)
- 3/4″ FNPT
- Materials:
- Body and actuator: Glass-filled nylon
- Rolling diaphragm: NBR (Buna-N), nylon fabric reinforced
- Spring: stainless steel 304
Here, The adjustable pressure regulator has excellent hydraulic performance capabilities and high mechanical strength and it is available with two reading options of 12 to 35 PSI and 28 to 60 PSI.
Also, DIG’s direct-acting adjustable pressure regulator is designed for an area where accurate and reliable control of line pressure is require. The pressure regulator reduces higher incoming pressure to lower constant downstream pressure regardless of fluctuating or varying upstream pressure. The pressure reading is triggerd by a pressure reactive diaphragm, which seeks to reach a balance between hydraulic and spring assembly forces. DIG 3/4 Inch Adjustable Pressure Regulator – Pack of 4
Features
- Adjustable with a single color coded screw
- Accurate and stable regulation
- Color coded
- Rolling diaphragm keeps the spring assembly free of debris
- Reliable control regardless of fluctuations in upstream pressure or flow
- Constant downstream pressure
- Immediate response
- High mechanical strength
- Highly durable, chemical resistant
- Can be installd at any position
How to use
Further, The pressure regulator is a critical part of drip and other irrigation systems when water pressure is higher than the suggested operation pressure recommende for the system. In most households, the water pressure is between 40 and 100 PSI, with some homes being even higher. Typically, in homes with high pressure, a heavy-duty pressure regulator is installe on the main water supply to lower the pressure entering the house. Drip irrigation systems are designd to work at an even lower pressure than is set for the house, with the optimal pressure for a drip system between 15 and 30 PSI.
Moreover, If higher pressure is found in a drip system, problems such as drip emitters popping off the drip or distribution tubing, high flow damaging the drip emitters or micro-sprinklers, components blowing out of the drip tubing and distribution tubing, and overall shortening of system life can occur. To achieve extende life with high uniformity and lower maintenance, a pressure regulator is highly recommendd to maintain optimum system pressure, regardless of any fluctuations in the house system pressure. DIG 3/4 Inch Adjustable Pressure Regulator – Pack of 4
Installation suggestions
The point of connection to the high-pressure water supply can start from an in-line or anti-siphon valve, well or pump.
Installation into in-line valve or into a pipe thread
- If the installation is into a PVC pipe, first shut off the main water supply.
- We recommend installing a 3/4″ ball valve or gate valve before the valve. This ball valve can be very useful as an emergency backup to turn the system off. This type of arrangement is used by professional installers.
- Turn the water supply on to flush the line and then shut the water supply off using the new ball valve or gate valve.
- Install the AC valve or battery-operatedcontroller, wrapping TEFLON tape on all the male thread fittings used.
- Turn the water supply on again to pressurize the system. The unit will open momentarily and then will shut off.
- To the outlet of a drip irrigation zone, install a 3/4″ screen filter with 120 to 150 mesh for drip system protection. Next, add the adjustable pressure regulator that can be used to lower the incoming system pressure to any desire pressure between 28 and 60 PSI. Higher pressures may be used for conventional sprinkler systems. Follow with a 3/4″ PVC female thread x slip adapter to the PVC pipe.
- Test the valve using the manual bleed. Check that the system is working and that there are no leaks.





Derek (verified owner) –
I’ve been relying on FarmHydroSupplies as my go-to supplier for hydroponic products; their shipping has always been reliable, and I can count on them to deliver my orders on time.
Hayden (verified owner) –
FarmHydroSupplies has become my number one supplier for hydroponic products; their exceptional shipping services ensure they deliver high-quality products in a timely manner.
Aaron (verified owner) –
Trusting FarmHydroSupplies with my hydroponic needs has never let me down; their shipping is always on point, ensuring a smooth experience.
Joshua (verified owner) –
FarmHydroSupplies has earned my trust as a reliable supplier; their commitment to timely shipping and delivering exactly what I need has solidified my confidence in their brand.
Mark (verified owner) –
I trust FarmHydroSupplies wholeheartedly when it comes to shipping; their track record of delivering products on time and in good condition is commendable.
Tristan (verified owner) –
The shipping process with FarmHydroSupplies was seamless; my order arrived promptly and in excellent condition.