Trimpro Workstation
Manual Control For trimming, take a branch of a freshly harvested plant in your hand and move it over the grate with a back-and-forth motion while rotating the plant at the same time. Its tempered steel blade makes a clean cut without damaging the plant. If you would prefer to have the flowers circulated by air, take a look at the Trimpro Automatik series which utilizes a fan and vacuumm to move the flowers over the grate and blade. Or check out the Trimpro Rotor series that utilizes robotic touch manipulation of the folowers to speed up trimming time.
Easy to Use The Trimpro Workstation is easy to use while standing or sitting and gives you tons of control over the end product. By adjusting the blade and the way you manipulate the flowers over the grate you can trim to your desired level and speed. All trimmings are collected for easy disposal or processing in a mesh bag.
Easy to Maintain The blade assembly can be easily removed for sharpening to ensure you always get the cleanest cut. Cleaning the non-stick grate is a breeze. Just spray the grate and blade with isopropyl alcohol between uses to ensure a clean and sharp cut. The unit is easy to disassemble and replacement parts are available here on
*For Wet Trimming Only* – Trimpro Trimmers are only intended for use with wet products. Damage may occur if used with a dry substance.
Trimpro Workstation is a good boutique model trimmer. The Stainless Steel grate is only 1/16 inch thick, allowing for a more precise cut. The circular hand movements and downward pressure guarantee that each blossom is trimmed to the desired level of perfection by the operator. Trimpro Workstation
Specs
Dimensions:
- Mounted machine: 16″ Diameter x 21″
- Packaging: 21″ x 21″ x 24″
Weight:
Machine only: 30 Lbs
Machine and packaging: 42 Lbs
Materials:
- Frame: Aluminum
- Grate: Steel
Grate Size:
- Trimpro Rotor (STD): Slots size 1/4″
Trimpro offers a full line of trimming machines of various types and sizes:
- Manual Control Trimmers: – Trimpro Trimbox – Trimpro Original – Trimpro Workstation – Trimpro Trimbox with Workstation
- Robotic Touch Trimmers: – Trimpro Unplugged – Trimpro Rotor – Trimpro Rotor XL – Trimpro Rotor with Workstation – Trimpro Rotor Med with Workstation
- Airflow Trimmers – Trimpro Automatik – Trimpro Automatik XL
General Warnings:
- Never place your fingers, gloves or any other body part in contact with the grate or the blade.
- Never apply pressure on the grate.
- Do not use scissors, knives or any instrument above the grate.
- Safety glasses and gloves are required at all time. The gloves have to be tight enough so they don’t get inside the grate slots. A loose glove is dangerous. BE AWARE! Trimpro Workstation
The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations.
albeit all of a sudden Here, whether or
Also, all things should be considered no sooner than
although analogous to
altogether, although this may be true
another key point Munch Machine Thumb Screw
basically, accordingly, above all both… and Centurion Pro Steel Belt Cover for 3.0
Additionally, after all, if… then
Afterward, after that, not only… but also
afterwards, all in all, neither… nor Mobius M108S Trimming Machine Groove Idler Pulley Twister T4 Nylon Brush Centurion Pro 3.0 Brus Trimpro Workstationh
albeit all of a sudden whether or Zoom Technologies Zoom Pro Hopper Twister T4 Leaf Collector: Vacuum Stand Foot, Twister T2 15 Amp Receptacle
Also, all things considered no sooner than Twister T2/T4 Extended Height Feed Conveyor (T4 Rails & T2 Triple/Quad) Tumbler Belt
although analogous, so that Twister T6 Leaf Collector 4″ Vacuum Hose, 8 ft. Long
sooner or later
such as
summing up
take the case of
that is
that is to say
then again
this time
to be sure
to begin with
altogether, although this may be true
































Gabriel (verified owner) –
I’ve been a loyal customer of FarmHydroSupplies for years, and their shipping reliability is one of the main reasons I keep coming back.
William (verified owner) –
I have no hesitation recommending FarmHydroSupplies for all your hydroponic needs; their shipping process is efficient, and their products consistently meet my expectations.
Roman (verified owner) –
FarmHydroSupplies exceeded my expectations with their shipping services; the packaging was secure, and my hydroponic products arrived intact.
Patrick (verified owner) –
The shipping process with FarmHydroSupplies was seamless; my order arrived promptly and in excellent condition.
Alan (verified owner) –
FarmHydroSupplies has consistently impressed me with their shipping services; they ensure secure packaging and timely delivery every time.
Blake (verified owner) –
FarmHydroSupplies has earned my trust as a reliable supplier; their commitment to timely shipping and delivering exactly what I need has solidified my confidence in their brand.