Trimpro Rotor XL
*For Wet Trimming Only* – Trimpro Trimmers are only intended for use with wet products. Damage may occur if used with a dry substance.
The Trimpro Rotor XL was created and developed in response to client requests for yet another delicate and efficient Trimpro grade product. Trimpro’s trademark delicate touch can now be applied to even the largest harvests, as the new Rotor XL provides the silent efficiency pioneered by the class-leading Rotor model to high-volume farmers that prefer rack drying. It is a simple flower trimmer that can help you save time and money during harvest. The Trimpro Rotor XL, with its high-speed and adjustable height blade, quickly cuts through large amounts of product while being kind and consistent.
Robotic Touch
The Rotor XL trimmers 6 rotating arms support 24 high-quality, stick- resistant leather fingers, designed to gently move flowers around the non-stick grate, allowing tempered steel blades below to trim leaves carefully and efficiently. These leather fingers help to tumble the flowers softly to allow the blade to cut all sides of the flower. If you would prefer to have the flowers circulated by air, take a look at the Trimpro Automatik series which utilizes a fan and vacuumm to move the flowers over the grate and blade.
Easy to Use
Control is optimized with finger and blade speeds individually variable, and adjustable height control for both the finger support arms and cutting head. The clear, hinged, drum-cover further enhances control, increasing visibility to reduce the need for second-pass processing. With secondary material falling securely into the workstations redesigned catch-bag system, touch-less extraction completes the process, with flowers exiting effortlessly through the units gate, once unlatched. As with all Trimpro machines, the blade height is adjustable to meet every preference. For trimming, separate the fresh flowers from the branches, put them into the upper container of the trimmer and let the Rotor do the rest. All of this is made easier with the available Trimpro Rotor Workstation , allowing you to work while standing and collecting the leaves in a mesh bag below. Trimpro Rotor XL
Easy to Maintain
The blade assembly can be easily removed for sharpening to ensure you always get the cleanest cut. Cleaning the non-stick grate is a breeze. Just spray the grate and blade with isopropyl alcohal between uses to ensure a clean and sharp cut. The unit is easy to dissasemble and replacement parts are available here on hydrobuilder.com.
Specs
Dimensions:
- Mounted machine: 28″ Diameter x 52″
- Packaging: 34″ x 34″ x 29″
- Stand packaging: 32″ x 32″ x 17″
Weight:
- Machine only: 145 Lbs
- Machine and packaging: 135 Lbs
- Stand only and packaging: 35 Lbs
Materials:
- Frame: Aluminum
- Grate: Steel
- Trimpro Rotor XL
Grate Size:
- Trimpro Rotor (STD): Slots size 1/4″(6mm)
General Warnings:
- Never place your fingers, gloves or any other body part in contact with the grate or the blade.
- Never apply pressure on the grate.
- Do not use scissors, knives or any instrument above the grate.
- Safety glasses and gloves are required at all time.
The gloves have to be tight enough so they don’t get inside the grate slots. A loose glove is dangerous. BE AWARE!
The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations.
Trimpro offers a full line of trimming machines of various types and sizes:
Manual Control Trimmers:
– Trimpro Trimbox
–a Trimpro Original
– Trimpro Workstation
– Trimpro Trimbox with Workstation
Robotic Touch Trimmers:
– Trimpro Unplugged
– Trimpro Rotor
– dTrimpro Rotor XL
– Trimpro Rotor with Workstation
– Trimpro Rotor Med with Workstation
Airflow Trimmers
– Trimpro Automatik
– Trimpro Automatik XL
albeit all of a sudden Here, whether or
Also, all things should be considered no sooner than
although analogous to
altogether, although this may be true
another key point Munch Machine Thumb Screw
basically, accordingly, above all both… and Centurion Pro Steel Belt Cover for 3.0 Trimpro Rotor XL
Additionally, after all, if… then
Afterward, after that, not only… but also
afterwards, all in all, neither… nor Mobius M108S Trimming Machine Groove Idler Pulley Twister T4 Nylon Brush Centurion Pro 3.0 Brush Trimpro Trimbox with Workstation
albeit all of a sudden whether or Zoom Technologies Zoom Pro Hopper Twister T4 Leaf Collector: Vacuum Stand Foot, Twister T2 15 Amp Receptacle
Also, all things considered no sooner than Twister T2/T4 Extended Height Feed Conveyor (T4 Rails & T2 Triple/Quad) Tumbler Belt Trimpro Trimbox
although analogous, so that Twister T6 Leaf Collector 4″ Vacuum Hose, 8 ft. Long
sooner or later
such as
summing up
take the case of
that is
that is to say
then again
this time
to be sure
to begin with
altogether, although this may be true


















Colin (verified owner) –
FarmHydroSupplies has consistently impressed me with their shipping services; they ensure secure packaging and timely delivery every time.
Gavin (verified owner) –
FarmHydroSupplies has earned my trust as a reliable shipping partner; they consistently go above and beyond to ensure my orders arrive on time and in excellent condition.
Hunter (verified owner) –
I’ve been a loyal customer of FarmHydroSupplies for years, and their shipping reliability is one of the main reasons I keep coming back.
Aaron (verified owner) –
I trust FarmHydroSupplies wholeheartedly when it comes to shipping; their track record of delivering products on time and in good condition is commendable.
Paul (verified owner) –
I’ve been relying on FarmHydroSupplies as my go-to supplier for hydroponic products; their shipping has always been reliable, and I can count on them to deliver my orders on time.
Damian (verified owner) –
I’ve been relying on FarmHydroSupplies as my go-to supplier for hydroponic products; their shipping has always been reliable, and I can count on them to deliver my orders on time.