King Electric KB Platinum Electronic Unit Heater
The KB Platinum series unit heaters from King are the most feature-rich on the market. Featuring an in-built electronic thermostat for precision and a remote control for ease of use. The KB Platinum has you covere with its integrated summer fan only. Also, and thermostat timed mode. To prevent freezing, these heaters are intende for use as primary. Or additional heat sources in large or exposed locations such as high-rise buildings. Stores, warehouses, garages, water treatment. And fire room vaults. Spiral finned steel elements and high CFM guarantee consistent air distribution. And cooler element operation, resulting in longer heater life. The KB Platinum unit heater will give years of trouble-free service. By combining high-quality components with a dynamically adjustd fan blade. For easy installation, a universal wall/ceiling bracket is include.
KB Platinum Includes It All. Offering an in-built electronic thermostat for accuracy. And remote control for simple operation, as well as an integrate summer. Fan only mode and thermostat timer mode, the KB Platinum has you covere.
Patented Smart Limit Protection (U.S. Patent #6,748,163 B2) automatically. Shuts power off to the heater in an abnormal event and must be manually reset for safety.
The metal sheath element is copper brazed with spiral fins then molde into a coil configuration. This combination produces the heat transfer while eliminating the potential for hot spots by positioning the element in the maximum airflow stream.
King Electric KB Platinum Electronic Unit Heater Features:
- Energy-Saving Electronic Temperature Controller
- Remote Control Included & Wall Holder
- Summer Fan Only & Timer Modes
- Adjustable Louvers to Direct Air
- Built-In Fan Delay To Dissipate Heat
- High Mass Steel Fin Heat Exchanger
- Patented Smart Limit Protection
- Permanent Lubricated Unit Bearing Motor
- Universal Wall/Ceiling Bracket Include
- Proudly made in the USA
- 5-year warranty
The King Electric KB Platinum Series Unit Heaters Engineering Specs:
Construction: All exterior and interior metal enclosure parts are made from 20 gauge electrogalvanize Steel with a rust inhibiting bake enamel finish. Smooth rounde corners and protective edge trim give an attractive modern appearance.
Adjustable Outlet Louver: Louvers direct air up or down as needed for the heating application.
Rear Intake Screen: Heavy gauge steel screen protects against foreign objects making accidental contact with the rotating fan blade.
Spiral Fin Elements: The metal sheath element is copper braze with spiral fins then molde into a coil configuration. This combination produces the best heat transfer while eliminating the potential for hot spots by positioning the element in the maximum airflow stream.
Totally Enclosed Fan Motor: Permanently lubricate long life, unit bearing with 20cc of oil. Epoxy-coate motor with enclosed rotor resists moisture and corrosion for long-lasting, trouble-free operation.
Aluminum Fan Blade: Axial flow-type fan mounte directly to the motor shaft for maximum efficiency.
Thermal Overload: Heaters shall be equippe with King’s patented thermal overload Smart Limit Protection, which disconnects elements and motor in the event normal operating temperatures are exceedd. If thermal overload trips due to abnormal operating temperatures, thermal overload shall remain open until manually reset by turning the heater off for 15 minutes. Automatically reset of thermal overloads, which allow the element to continue to cycle under abnormal conditions, will not be acceptd.
Internal Controls: Magnetic contactors are standard on all 480V heaters, all 208V/1-Phase, 240V/1-Phase, 277V/1-Phase heaters above 6kW, and all 3-Phase heaters. The control voltage is equal to the line voltage (208, 240 or 277) except for 480V models where a transformer is provide for 24V control. Over 5kW the line voltage control is operating the contactor coil only and will draw only 1 Amp. See page 64 for control voltages.
Fusing: Internal circuit fusing is provide when the heater ampacity exceeds 48 Amps to comply with N.E.C. standards. A fan delay is provide standard on models 12.5-kW and above to dissipate residual heat from the heating elements.
Easy Installation: A quick access panel locate on the bottom of the heater allows for quick wiring and easy maintenance for the life of the heater. Includes universal wall/ceiling bracket for simple installation.
Approvals: cULus (E41422)








Reviews
There are no reviews yet.