Dosatron Water Powered Doser – D40 Series – 40 GPM
Specifications for the D40 Series
| Water Flow Range | 2.2 to 40 GPM |
|---|---|
| Operating Pressure Range | 4.3 to 116 PSI |
| Available Housing Materials | Polyacetal |
| Weight | 12 lbs |
|---|---|
| Connection Size | 1.5″ NPT |
| Maximum Temperature | 104° F |
Simplify your nutrients by directly installing Dosatron Doser into the water line
Available options: (Seal & Diltuion/Injection Range)
- D40MZ2VFBPHY – Viton Seal – 1:500 to 1:50
- D40MZ5VFBPHY – Viton Seal – 1:100 to 1:20
- D40MZ3000VFBPHY – Viton Seal – 1:3000 to 1:500
- D40MZ3000VFBPKII – Kalrez Seal – 1:3000 to 1:500
Installed on the water supply line, the Dosatron uses water pressure as the only power source. Thus activated, it takes up the required percentage dose of concentrate and then mixes it with the moving water. The solution produced is then propelled downstream. The dose of injected product is always proportional to the volume of water passing through the Dosatron, regardless of variations in flow or pressure in the water supply line Dosatron Water Powered Doser – D40 Series – 40 GPM
With flow up to 40 GPM, can be installed in parallel to increase the water flow. 63% fewer parts, metal free piston.
40 GPM is the max flow rate for the D40 series
*Additional D40 injectors coming soon
Selecting your Dosatron Injector
Seal Options
- Viton SealsGenerally used for products with neutral to acidic pH. Ex: fertilizers, pesticides, acids (pH correction), supplements, surfactants
- Aflas SealsGenerally used for products with a higher than neutral to alkaline pH. Ex: pH up products, calcium hydroxide (liquid lime), calcium carbonate, potassium carbonate
- Kalrez SealsUsed specifically for Peracetic acid (also known as peroxyacetic acid, or PAA) products. Ex: ZeroTol, SaniDate, etc.
Dilution / Injection Range
The Ratio Range for doser dilution is the range of rates that doser can be adjusted to for specific amount of chemical injection into the water supply. Most dosers can be adjusted within a range of dilution amounts and other dosers have fixed dilution amounts.
EX: Dilution range of 1:500 to 1:50 gives us a percentage of solution to water of 0.2% to 2%. This essentially tells us the percentage of chemical mixture dosed into the water supply.
The ratio and percentages are also commonly view in the following units.
- mL/gal
- tsp/gal
- oz/gal
D40 Ratio Ranges
| Ratio Range | mL/gal | tsp/gal | oz/gal |
|---|---|---|---|
| 1:100 to 1:20 | 37.5 to 190 mL | 7.5 to 38 tsp | 1.280 to 6.4 oz |
| 1:500 to 1:20 | 7.5 to 190 mL | 1.5 to 38 tsp | 0.256 to 6.4 oz |
| 1:500 to 1:50 | 7.5 to 75 mL | 1.5 to 15 | 0.256 to 2.56 oz |
| 1:3000 to 1:500 | 1.25 to 7.5 mL | 0.25 to 1.5 tsp | 0.043 to 0.256 |
Dosatron Model Name Definitions.
There are several Dosatron Dosers with similar models numbers that vary by only 1 or 2 letters. BE SURE to make a selection based on your exact needs!
Units with HY in the name are specifically meant for the Dosatron NDS – Nutrient Delivery System. Units with “HY” in the model number include a SCH 80 Threaded Union to connect the injector to the other injectors/kits in-line. Dosatron Water Powered Doser – D40 Series – 40 GPM
Units with BY have a Bypasss option essentially taking the specific doser out of operation. Once the Bypass switch is flipped, the dosers stops the ram pump from pulling chemicals into the water line.
- V: Identifies the type of hose (stands for Viscous)
- BP: Units with bypass options
- P: Identifies the type of housing (stands for PVDF or Kynar)
- IE: Units with side injection option
- WL: Certified by NSF to NSF/ANSI 61 Standards
- D: Car wash units
- HY: Hydroponic / Nutrient Delivery System units
- AF/VF: Identifies the type of seals (AF = Aflas® or VF = Viton)
- K: Kalrez
- II: Identifies the region (North/Central Am. – Dosatron International, Inc.)
How the Water Powered Doser works
Dosatron water-powered, non-electric chemical injectors are the easiest, most reliable way to accurately inject chemicals into water lines. Dosatron injectors work using volumetric proportioning, ensuring that the chemical mixture remains the same regardless of variations in pressure and flow.
When water enters the injector, it triggers the hydraulic motor, which begins moving up and down inside the body of the injector.
On the upstroke, the Dosatron draws fluid up from the concentrate tank in an action similar to a hypodermic syringe.
On the down stroke, the concentrate is displaced into the mixing chamber, where it is mixed with the water flowing through the unit. Then the water-and-chemical mixture is discharged into the water lines.
- Water Flow
- Water enters the Dosatron body
- Concentrate is pulled up into the Dosatron
- Dosatron Water Powered Doser – D40 Series – 40 GPM
- Concentrate mixes with the incoming water
- Blended solution is discharged into the water line
*Doser in example may look different from your actually doser





Hunter (verified owner) –
I confidently rely on FarmHydroSupplies as my primary hydroponic supplier; their shipping expertise and commitment to customer satisfaction are unmatched.
Alan (verified owner) –
The shipping process with FarmHydroSupplies was flawless; my order arrived promptly and in perfect condition.
Simon (verified owner) –
FarmHydroSupplies has built a strong reputation for delivering products on time, intact, and without any hassles.
Noah (verified owner) –
I have recommended FarmHydroSupplies to fellow hydroponic enthusiasts because their shipping reliability is second to none.
Parker (verified owner) –
FarmHydroSupplies has earned my trust as a reliable shipping partner; they consistently go above and beyond to ensure my orders arrive on time and in excellent condition.
Roman (verified owner) –
I trust FarmHydroSupplies wholeheartedly when it comes to shipping; their track record of delivering products on time and in good condition is commendable.