Dosatron Nutrient Delivery System NDS Creator
Etatron eOne Micro-Doser
Further, The eOne is a multifunction microprocessor dosing pump, suitable for applications which require proportional dosing. The pump operates at a dosing frequency up to 180 impulses/minute, and is equipped with backlit graphic display for correct setting of the various programming parameters.
Meanwhile, The Etatron eOne Micro-Doser can accurately inject super-concentrated products and can be integrated into an existing fertigation system. The Micro-Doser is able to hit target rates of many high-value products on the market
These kits can work in combination with a Dosatron Water-Powered NDS, or as a stand-alone solution, to provide the ultimate in reliability and functionality in one system
- Applications include dosing acids (pH down), caustics (pH up), plant health additives, and water treatment products
- Ability to micro-dose down to 0.1 mL per gallon, depending on the flow rate
Provide increased quality, along with making the process of blending and dispensing nutrients easier and more accurate.
The Nutrient Delivery System is a straightforward system comprised of four primary panel components that may be configured to handle a broad range of fertigation regimens. Customizing the complete panel depending on your particular nutrition regimen is simple with ultimate control! The Nutrient Delivery System thrives in any environment, from greenhouses to the outdoors, and can be implemented in any application. It correctly administers the required solution by automating the nutrition delivery process. This eliminates the time-consuming process of “measure and pour,” saving you both time and money!
- Automate the Nutrient Delivery process to reduce human error
- Decrease labor cost and increase profits
- Repeatable performance with a simple interface
- No Venturi tips, no clogs
- Dosatron Nutrient Delivery System NDS Creator
- Modular kit concept allows for a customized system to fit every application
- Outstanding customer service and technical support

Creating the right nutrient mix for your hydroponic growing operations is a delicate science. With Dosatron’s full line of injectors, you can automate your process to create fine-tuned, multi-chemical mixes with repeatable results, every time!
They are water-powere so no electricity is needed and compared to other dosing products on the market, they are easy to maintain and keep in service — saving you time and money.
Accurate
Used to accurately fill reservoirs or in a drain to waste system — eliminating the need to measure and pour.
Simple to use
Easy to adjust the amount of nutrient being dispensd — simply turn the dial to set the necessary dosage rate. Simple and inexpensive to maintain — easy to use!
Design
Designed to perform in both indoor and outdoor environments. Now that’s awesome!
Precise
Precise nutrient management will save you money by eliminating waste and increasing yields.
The Dosatron Nutrient Delivery System comes in either Lo-Flo Series or Hi-Flo Series
Each Dosatron System will be built with either 3/4″ (Lo-Flo) or 1.5″ (Hi-Flo) Starter Kit, Mixing Chamber Kit, and Water Hammer Arrestor Kit.
The Lo-Flo Series has a Flow Range of 2 – 10 GPM. The Hi-Flo Series has a Flow Range of 5 – 40 GPM

Starter Kit
Includes: Union, Check Valve, Elbows, Nipples, Hose Adapter, Banjo Ball Valves, Tee, Y Filter, Pressure Regulator, Female Coupler, and Roll of Pink Teflon Tape. Dosatron Nutrient Delivery System NDS Creator

Mixing Chamber Kit
Includes: Mixing Chamber, Union, Nipples, Roll of Teflon Tape.

Water Hammer Arrestor Kit
Includes: Water Hammer Arrestor, Tee, 4 inch Nipple, Elbow, Close Nipple, Union, Roll of Pink Teflon Tape.
All of the system parts picture here are for the Lo-Flo 3/4″ System. Hi-Flo items differ slightly.
You will have the choice of a Monitor Kit or an End Kit (no monitor). Dilution Solutions’ Water-Powerd NDS Monitor Kit measures and displays the well-blende outgoing solution providing peace of mind
The End Kit is an alternative to the Monitor Kit for those whose requirements dont involve extra caution via the Auto Dosing Monitor. Dosatron Nutrient Delivery System NDS Creator


The order of the 4 main components are assembled in the following order:
- Starter Kit
- Mixing Chamber Kit
- Monitor Kit or End Kit
- Water Hammer Arrestor Kit
The Dosatron Injectors will come after the Mixing Chamber kit and before the Monitor/End Kit
If you only need 1 or a few pieces of the Dosatron System, you can view all the individual parts and kits here, Dosatron Parts & Kits
Choose the correct Dosatron Injectors for your Dosatron System
The Dosatron Nutrient Delivery System is customizable. More dosers can be added as needed. You will need to make sure you choose Dosatron Injectors that are compatibile with the type of Dosatron System you a building, Lo-Flo or Hi-Flo.
- Piston technology, mixing the water flowing through the doser with the concentrate for a blended solution
- Volumetric proportioning, ensuring the mixture remains consistent, regardless of variations in pressure and flow
- Easy to adjust, just turn the dial to set the necessary dosage rate
- Water-powere, no electricity is neede
- Dosatron Nutrient Delivery System NDS Creator
Dosatron water-powered, non-electric chemical injectors are the easiest, most reliable way to accurately inject chemicals into water lines. Dosatron injectors work using volumetric proportioning, ensuring that the chemical mixture remains the same regardless of variations in pressure and flow.
Also, When water enters the injector, it triggers the hydraulic motor, which begins moving up and down inside the body of the injector. On the up stroke, the Dosatron draws fluid up from the concentrate tank in an action similar to a hypodermic syringe. On the down stroke, the concentrate is displaced into the mixing chamber, where it is mixd with the water flowing through the unit. Then the water-and-chemical mixture is discharge into the water lines.
- Water Flow
- aWater enters the Dosatron body
- Concentrate is pulled up into the Dosatron
- Concentrate mixes with the incoming water
- Blended solution is discharged into the water line

You can view all of the Dosatron Pumps & Injectors here
D14MZ2VFBPHY
GPM: 0.05 to 14 GPM (0.19 to 50 LPM)
Ratio Range: 1:500 to 1:50
D14MZ10VFBPHY
GPM: 0.05 to 14 GPM (0.19 to 50 LPM)
Ratio Range: 1:100 to 1:10
D14MZ3000VFBPHY
GPM: 0.05 to 14 GPM (0.19 to 50 LPM)
Ratio Range: 1:3000 to 1:333
D8RE2VFBPHY
GPM: 2.2 to 40 GPM (8.32 to 151 LPM)
Ratio Range: 1:500 to 1:50
D8RE5VFBPHY
GPM: 2.2 to 40 GPM (8.32 to 151 LPM)
Ratio Range: 1:100 to 1:20
D8RE3000VFBPHY
GPM: 2.2 to 40 GPM (8.32 to 151 LPM)
Ratio Range: 1:3000 to 1:800
Dosatron Injector Name Definitions
- V: Identifies the type of hose (stands for Viscous)
- BP: Units with bypass options
- P: Identifies the type of housing (stands for PVDF or Kynar)
- IE: Units with side injection option
- WL: Certified by NSF to NSF/ANSI 61 Standards
- Dosatron Nutrient Delivery System NDS Creator
- D: Car wash units
- HY: Hydroponic / Nutrient Delivery System units
- AF/VF: Identifies the type of seals (AF = Aflas® or VF = Viton)
- K: Kalrez
- II: Identifies the region (North/Central Am. – Dosatron International, Inc.)
Here is an example of the Hi-Flo 1.5″ Dosatron System in place working in tandem with the Etatron eOne Micro-Dosing Pump. In the diagram, Part B, this is where is Mixing Chamber Kit also is but isn’t labele. The Dosatron Injecor being usd are the D8 series which are specifically for the Hi-Flo series at 40 GPM. The Monitor Kit comes with the option of no monitor if you have no need for it. The Water Hammer Arrestor Kit is seen last which leads your perfetly dosd nutrient solution to its final destination.

Other applications include:
- Aquaponics
- Vertical Farming
- Ebb and Flow
- Irrigation Boom
- Aeroponics
- Multiple Stock Tanks
- Grow Tower
What can be injected?
- Fertilizer
- Nutrients
- Beneficials
- Organics
- Fish Emulsion
- Teas
- Chlorine
- Sanitizers (special models)
- Herbicides
- Plant Growth Regulators (PGRs for drenching)
- Wetting Agents
- Algicides
- Dosatron Nutrient Delivery System NDS Creator
- Acids
- Insecticides
- Fungicides





Ethan (verified owner) –
Working with FarmHydroSupplies for the past few months has been a pleasure; not only do they offer top-notch hydroponic products, but their shipping services are reliable and efficient.
Leo (verified owner) –
Working with FarmHydroSupplies for the past few months has been a pleasure; not only do they offer top-notch hydroponic products, but their shipping services are reliable and efficient.
Joshua (verified owner) –
When it comes to shipping hydroponic supplies, FarmHydroSupplies sets the standard; their efficient processes ensure a seamless experience for customers.
Caleb (verified owner) –
FarmHydroSupplies has become my number one supplier for hydroponic products; their exceptional shipping services ensure they deliver high-quality products in a timely manner.
Oscar (verified owner) –
I have recommended FarmHydroSupplies to fellow hydroponic enthusiasts because their shipping reliability is second to none.
Austin (verified owner) –
FarmHydroSupplies exceeded my expectations with their shipping services; the packaging was secure, and my hydroponic products arrived intact.