Across International -30C 40L Recirculating Laboratory Chiller with 30L/Min Centrifugal Pump, 220V
Firstly, Ai C30-40 compressor-based recirculating chillers provide exceptional performance and dependability, as well as quiet operation and convenience of use. A powerful force/suction pump ensures consistent flow rates, while a microprocessor PID controller provides the optimum option when precise temperature control or cooling below ambient temperature is required.
Further, the Ai C30-40 series recirculating chillers are the real thermostatic control laboratory chillers. They are also perfect for chilling rotary evaporators. Also, analytical instruments, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. In laboratory settings, this system may also be utilised to replace tap water cooling.
IMPORTANT! THE ULTIMATE TEMPERATURES OF -30°C/-22°F ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ARE ATTACHED).
Features
- UL 61010-1 and CSA C22.2 certified (optional)
- Across International -30C 40L Recirculating Laboratory Chiller with 30L/Min Centrifugal Pump, 220V
- No dry ice or liquid nitrogen needed
- Advanced PID digital temperature controller
- The built-in chilling fluid filter protects the recirculating pump and prevents blockage
- All-steel construction for durability
- Eco-friendly R404A refrigerant
- Cost-saving as water consumption is completely eliminated
- Built-in casters for mobility
- Insulated tubing included
- Recommended for 50-liter rotary evaporators
What’s Included
- Ai -30°C/-22°F recirculating chiller
- 3/8″ insulated chilling fluid tubing, 11 ft
- (3x) 3/8″ stainless steel chilling fluid connector with on/off valve
- PTFE sealing tape
- User’s manual
Across International -30C 40L Recirculating Laboratory Chiller with 30L/Min Centrifugal Pump, 220V
Specs
| Model | C30-40-50L |
| Temperature range | Ambient to -30°C (No load) |
| Electrical requirements | 220V, 60Hz, 1-PH, 18A, 3,960 watts (Not compatible with 50Hz power) |
| Cooling capacity (Assuming working environment 25°C/77°F) | 0@ 32°F/0°C: 5,000W 1@ 14°F/-10°C: 3,000W @-4°F/-20°C: 1,800W @-22°F/-30°C: 1,000W |
| Compressor | Make: KK Power: 208-230V, 60Hz, 1-PH Number of compressor: one Refrigerant: R404A (3.2 kgs) |
| Recirculating pump | Model: 25PLBR30-10 Across International -30C 40L Recirculating Laboratory Chiller with 30L/Min Centrifugal Pump, 220V |
| Coolant outlet pressure | Displayed on the built-in mechanical pressure gauge |
| Reservoir | Material: Type 304 stainless steel, polished Chilling fluid connection: 3/4″ NPT Drain port: 1/2″ NPT Overflow port: 3/8″ hose barb Capacity: 40 liters or 10.6 gallons Dimensions: 17.5 x 17.5 x 9.5″ (WxDxH) |
| Radiator | Fan motor Make: Boyoung Model: YWF4E-400 Power: 220V, 60Hz, 1.3A, 300W Rotation speed: 1550 rpm Flow rate: 4240 m3/hour Cleaning Clean radiator fins with a fin comb every three months |
| 2Temperature controller | Type: Digital microprocessor, PID-controlled Display unit: Celsius °C 4Temperature accuracy: +/- 2°C Temperature range: Ambient to -30°C |
| Temperature sensor type | Pt100 |
| Housing | Powder-coated type 42 stainless steel |
| Recommended coolant | For 50°F/10°C or higher: distilled water Between 50°F/10°C and -22°F/-30°C: 50% ethylene glycol + 50% distilled water |
| Working environment | -15°C/5°F to 25°C/77°F, at <66% humidity |
| Built-in swivel casters | Four Across International -30C 40L Recirculating Laboratory Chiller with 30L/Min Centrifugal Pump, 220V |
| 2Unit/shipping dimensions | 40 x 25 x 41″ / 46 x 30 x 51″ (WxDxH) |
| 1Unit/shipping weight | 365 Lbs / 480 Lbs |
| Safety | Compressor over-temp protection Compressor delay start protection Short circuit and ground protection 1Over-current protection Over-voltage protection |
| Recommended for rotary evaporators | Ai 50L SolventVap rotary evaporators |
| Warranty | One year |
| Compliance | UL 61010-1 :2012 Ed.3+R:29Apr2016 CSA C22.2#61010-1 :2012 Ed.3 |




















Nathan (verified owner) –
Trusting FarmHydroSupplies with my hydroponic needs has never let me down; their shipping is always on point, ensuring a smooth experience.
Justin (verified owner) –
I confidently rely on FarmHydroSupplies as my primary hydroponic supplier; their shipping expertise and commitment to customer satisfaction are unmatched.
Justin (verified owner) –
FarmHydroSupplies exceeded my expectations with their shipping services; the packaging was secure, and my hydroponic products arrived intact.
Julian (verified owner) –
I highly recommend FarmHydroSupplies for their hydroponic products and shipping expertise; they have proven themselves to be a trustworthy supplier, and I have complete confidence in their services.
Matthew (verified owner) –
FarmHydroSupplies has consistently provided excellent shipping services; their attention to detail and quick order processing make them my preferred choice.
Kyle (verified owner) –
When it comes to shipping hydroponic supplies, FarmHydroSupplies sets the standard; their efficient processes ensure a seamless experience for customers.