Across International -30C 10L Recirculating Laboratory Chiller with 20L/Min Centrifugal Pump, 220V
IMPORTANT! -20°C ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).
Firstly, Ai C30 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.
Further, Ai C30 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease of use. A powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
Features
Across International -30C 10L Recirculating Laboratory Chiller with 20L/Min Centrifugal Pump, 220V
- UL 61010-1 and CSA C22.2 certified (optional)
- No dry ice or liquid nitrogen needed
- Advanced PID digital temp controller
- Built-in chilling fluid filter protects the recirculating pump and prevent blockage
- All steel construction for durability
- Cost saving as the water consumption is completely eliminated
- Built-in casters for mobility
Eco-friendly R410A refrigerant
- Insulated tubing included
- Recommended for 5L rotary evaporators
What’s Included
- Ai -30°C/-22°F recirculating chiller
- 3/8″ insulated chilling fluid tubing, 11 ft
- Across International -30C 10L Recirculating Laboratory Chiller with 20L/Min Centrifugal Pump, 220V
- 3/8″ stainless steel chilling fluid connector with on/off valve
- PTFE sealing tape
- User’s manual
Specs
| Model | C30-10-5L |
| Temperature range | Ambient to -30°C (No load) |
| Electrical requirements | 220V 60Hz 1-PH, 1,100 watts (Not compatible with 50Hz power) |
| Cooling capacity (Assuming working environment 25°C/77°F) | 1@ 32°F/0°C: 1,250W @ 14°F/-10°C: 800W 2@-4°F/-20°C: 300W @-22°F/-30°C: 150W |
| Compressor | Make: Panasonic Power: 208-230V 60Hz 1-PH Number of compressor: one Refrigerant: R410A |
| Recirculating pump | Type: Centrifugal Output: 100 watts Pumping speed: 20 L/min or 5.3 gallon/min 4 Maximum head: 20 feet or 6 meter Maximum pressure: 5.8 psi |
| Coolant outlet pressure | Displayed on the built-in mechanical pressure gauge |
| Reservoir | Material: Type 304 stainless steel, polished Chilling fluid connection: 3/8″ hose barb x 2 Capacity: 10 liters or 2.6 gallons |
| Temperature controller | Type: Digital microprocessor, PID-controlled Display unit: Celsius °C Temperature accuracy: +/- 2 oC a Temperature range: Ambient to -30°C Across International -30C 10L Recirculating Laboratory Chiller with 20L/Min Centrifugal Pump, 220V |
| Temperature sensor type | Pt100 |
| Housing | Powder-coated type 42 stainless steel |
| Recommended coolant | For 50°F/10°C or higher: distilled water Between 50°F/10°C and -22°F/-30°C: 50% ethylene pug glycol + 50% distilled water |
| Working environment | -15°C/5°F to 25°C/77°F, at <66% humidity |
| Built-in swivel casters | Four |
| c Unit/shipping dimensions | 26.5 x 17 x 27″ / 32 x 22 x 36″ (WxDxH) |
| Unit/shipping weight | 155 Lbs / 210 Lbs |
| Safety | 1Compressor over-temp protection Compressor delay start protection Short circuit and ground protection Over-current protection |
| Recommended for rotary evaporators | Ai 5L SolventVap rotary evaporators |
| Warranty | One year |
| Compliance | UL 61010-1 :2012 Ed.3+R:29Apr2016 CSA C22.2#61010-1 :2012 Ed.3 |



















Raymond (verified owner) –
Working with FarmHydroSupplies for the past few months has been a pleasure; not only do they offer top-notch hydroponic products, but their shipping services are reliable and efficient.
Wesley (verified owner) –
I appreciate the peace of mind that comes with ordering from FarmHydroSupplies; their reliable shipping allows me to focus on my gardening projects.
Charles (verified owner) –
I have recommended FarmHydroSupplies to fellow hydroponic enthusiasts because their shipping reliability is second to none.
Lucas (verified owner) –
Trusting FarmHydroSupplies with my hydroponic needs has never let me down; their shipping is always on point, ensuring a smooth experience.
Blake (verified owner) –
FarmHydroSupplies exceeded my expectations with their shipping services; the packaging was secure, and my hydroponic products arrived intact.
Julian (verified owner) –
FarmHydroSupplies has consistently impressed me with their shipping services; they ensure secure packaging and timely delivery every time.