Hanna Instruments Grochek Replacement Probe for HI98115 Specs
| Reference | Single, Ag/AgCl |
|---|---|
| Junction / Flow Rate | Cloth |
| Electrolyte | Gel |
| Max Pressure | 0.1 bar |
| Range | pH: 0 to 13 / EC; T: 0 to 50°C (32 to 122°F) – LT |
| Tip / Shape | Spheric (dia: 8.0 mm) |
| Temperature Sensor | Yes |
|---|---|
| Body Material | polypropylene |
| Cable | 7-pole; 1 m (3.3’) |
| Recommended Use | Greenhouses, hydroponics, environmental monitoring, water treatment, boilers, cooling towers |
| Connection | DIN |
| Special Note | *To be used with HI9811, HI9812 and HI9813 series |
Here, the HI1285-5 is a 3-in-1 pre-amplified multiparameter probe with a single polypropylene body that measures pH, EC/TDS, and temperature. This probe’s pH section is made of a low-temperature glass detecting bulb, a cloth connection, and a maintenance-free polymer gel electrolyte. This probe’s EC/TDS section uses two pins made of stainless steel to amperometrically measure conductivity and total dissolved solids. The pH and EC/TDS values are corrected for temperature fluctuations in both standards and samples thanks to an integrated temperature sensor. For measuring pH, EC/TDS, and temperature in greenhouses, hydroponic systems, environmental monitoring, water treatment, boilers, and cooling towers, the HI1285-5’s design considerations are suitable. The portable multiparameter metres HI9813-5, HI9812-5, and HI9811-5 from Hanna are compatible with the HI1285-5.
Hanna Instruments GroChek replacement probe for HI98115 Features
- Pre-amplified pH electrode
- Amperometric EC/TDS sensor
- Built-in temperature sensor
Pre-Amplified Multiparameter pH Probe
The pH electrode circuit has a built-in amplifier that serves to reduce the effects of electrical noise on the high impedance-pH measurement. Electrical noise can come from motors and pumps that are common in greenhouses. The single reference junction design of the pH electrode has a cloth junction that allows ion movement between the inner gel electrolyte and the sample being measured. The advantage of the cloth junction is that it can be extracted from the probe, exposing a fresh surface when readings become drifty or erratic. These features make this probe ideal for use in fertilizer solutions. Hanna Instruments Grochek Replacement Probe for HI98115
Amperometric EC/TDS Sensor
EC/TDS readings are performed by a two-pin amperometric sensor. An alternating voltage is applied to the sensor and the amount of current that passes between the two stainless steel pins determines the amount of dissolved ionic solids present.
Built-In Temperature Sensor
pH and EC/TDS readings must be temperature compensated in order to obtain accurate results. The built-in temperature sensor of the HI1285-5 provides a speedy temperature reading which is then used to adjust the pH and EC/TDS results accordingly.
Polypropylene Body
The polypropylene body of the HI1285-5 houses all three sensors within a sturdy, single body design. This body material is suitable for a wide range of applications and excels in measurements with portable meters due to its durability. The fins around the spherical glass pH bulb minimizes breakage due to accidental bumping or dropping of the electrode. The polypropylene plastic is a high-quality plastic that is chemically resistant to many aggressive chemicals. Hanna Instruments Grochek Replacement Probe for HI98115
DIN Connector
The HI1285-5 uses a DIN connector. This type of connector is generally proprietary to the meters they are supplied with and may not be interchangeable. The HI1285-5 is designed for use with Hanna’s HI9813-5, HI9812-5, and HI9811-5 portable multiparameter meters.




Derek (verified owner) –
The shipping process with FarmHydroSupplies was flawless; my order arrived promptly and in perfect condition.
Ryker (verified owner) –
I’ve been relying on FarmHydroSupplies as my go-to supplier for hydroponic products; their shipping has always been reliable, and I can count on them to deliver my orders on time.
Max (verified owner) –
I trust FarmHydroSupplies wholeheartedly when it comes to shipping; their track record of delivering products on time and in good condition is commendable.
Wesley (verified owner) –
Trusting FarmHydroSupplies with my hydroponic needs has never let me down; their shipping is always on point, ensuring a smooth experience.
Bradley (verified owner) –
FarmHydroSupplies has consistently provided excellent shipping services; their attention to detail and quick order processing make them my preferred choice.
Nolan (verified owner) –
Working with FarmHydroSupplies for the past few months has been a pleasure; not only do they offer top-notch hydroponic products, but their shipping services are reliable and efficient.