Hanna Instruments pH Soil Meter
Probe Condition
An on-screen indicator provides visual confirmation that your probe is working at its best.
Low Battery Indicator
The included batteries provide 1400 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
Automatic Shut-off
The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on. The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.
Built to be Durable
Designed to withstand the knocks, drops, and spills of real life, the new IP67 body ensures top performance in any environment. These meters are protected against dust and water intrusion from any direction.
Portable Design
Made to fit comfortably in your hand for on-the-go testing, the multilevel LCD display provides at-a-glance readings of pH and temperature from any angle and dual button operation streamlines the testing process for any user.
Quick Connect Probe
A Quick Connect DIN connector makes attaching and removing the probe simple and easy. The rubber coating protects the cable and provides a water-tight seal without twisting.
Open Junction
The open junction design reduces clogging from organic materials found in soil for a more stable pH measurement and reduced maintenance.
Conical Glass Tip
The conical shaped tip design allows for penetration into solids, semi solids, and emulsions for the direct measurement of pH in a variety of substrates used in agriculture.
Glass Body
A glass body is easy to clean, is chemically resistant, and quick to reach thermal equilibrium for a faster, more stable measurement. A built-in temperature sensor ensures fast, accurately compensated readings even during sudden temperature fluctuations.
Hanna Instruments believes that buying a meter should be simple. Your Direct Soil pH Portable Meter is equipped with everything you need for successful testing right out of the box.
Secondly, the HI99121 Direct Soil pH Portable Meter is built exclusively for soil analysis and is intended to simplify pH testing of soil. The specialised probe has a tough conical tip, an open junction design, and a glass body, making it perfect for measuring soil pH immediately or after preparing a soil slurry with deionized water. Your measurements, like your electrode, demand close care. The HI99121 Direct Soil pH Portable Meter contains a replacement HI12923 pH electrode that has been particularly designed for the pH analysis of soil and soil slurries. Hanna Instruments pH Soil Meter
Hanna Instruments pH Soil Meter Included Items:
- HI12923 pH/temperature probe
- pH 4.01 & 7.01 Buffer sachet
- HI700663 electrode cleaning solution for soil deposits (1 sachet)
- aHI700664 electrode cleaning solution for humus deposits (1 sachet)
- HI7051M soil preparation solution
- HI721319 ground auger
- 100 mL beaker (1 pc.)
- Alkaline batteries: 1.5V AAA (3 pcs.)
- Rugged carrying case
- Calibration certificate of meter
- Calibration certificate of probe
- Instruction manual
Electrode Cleaning Solution for Soil and Humus Deposits
Your Direct Soil pH Portable Meter comes with cleaning solution that has been engineered to keep your electrode free from debris found in soils. This concentrated combination of detergents cleans your meter quickly and effectively so that your meter stays in optimum condition.
pH 4 & 7 Buffer Sachets
When performing a pH calibration it is important that the correct buffers are used. We include some start buffers to get you going. The single-use sachets are individually sealed so you use fresh buffer each time you calibrate. Hanna Instruments pH Soil Meter
Soil Preparation Solution
Using the HI7051M soil preparation solution prior to taking a measurement provides for a more accurate pH reading of soil samples.
Ground Auger
A plastic auger is sup‑plied to perforate and loosen the soil prior to measurement. This will prevent scratching the pH sensitive glass on nutrient crystals or small pebbles.
HI99121 Models and Compatible Accessories

Old HI99121 (Left)
- Uses the HI1292D pH probe with DIN Connector
- Compatible with the HI710023 Shockproof Boot
New HI99121 (Right)
- Uses the HI12923 pH probe with Quick DIN Connector
- Compatible with the HI710028 Shockproof Boot
NOTE: *The new Quick DIN probe connection is compatible with the old body design, however, the old DIN probe connections are not compatible with the new body design.
| pH Range | -2.00 to 16.00 pH / -2.0 to 16.0 pH |
|---|---|
| pH Resolution | 0.01 pH / 0.1 pH |
| pH Accuracy (@25°C/77°F) | ±0.02 pH / ±0.1 pH |
| pH Calibration | Automatic, at one or two points with two sets of standard buffers (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18) |
| mV Range | ±825 mV (pH-mV) |
| mV Resolution | 4 mV |
| mV Accuracy | ±1 mV (pH-mV) |
| Temperature Range | -5.0 to 105.0 °C/23.0 to 221.0 °F |
| Temperature Resolution | 0.1 °C/0.1 °F Hanna Instruments pH Soil Meter |
| Temperature Accuracy (@25°C/77°F) | ±0.5 °C up to 60 °C; ±1.0 °C outside ±1.0 °F up to 140 °F; ±2.0 °F outside |
|---|---|
| Temperature Compensation | Automatic -5.0 to 105.0 °C/23.0 to 221.0 °F |
| Power Supply | 1.5V AAA batteries (3 pcs.) |
| Power Consumption | approx. 1400 hours of continuous use |
| Environment | 0 to 50°C (32 to 122°F); RH max 100% |
| Dimensions | 154 x 63 x 30 mm (6.1 x 2.5 x 1.2″) |
| Weight | 199 g (6.91 oz.) with batteries |
| Warranty | 2 Years |
| Recommended Probe | HI12923 glass body, pre‑amplified pH electrode for soil measurement with internal temperature sensor, DIN connector and 1 m (3.3’) cable (included) |





Peter (verified owner) –
FarmHydroSupplies has become my number one supplier for hydroponic products; their exceptional shipping services ensure they deliver high-quality products in a timely manner.
Avery (verified owner) –
When it comes to shipping hydroponic supplies, FarmHydroSupplies sets the standard; their efficient processes ensure a seamless experience for customers.
Kai (verified owner) –
FarmHydroSupplies has consistently impressed me with their shipping services; they ensure secure packaging and timely delivery every time.
Mason (verified owner) –
FarmHydroSupplies has become my number one supplier for hydroponic products; their exceptional shipping services ensure they deliver high-quality products in a timely manner.
Aadarsh (verified owner) –
I trust FarmHydroSupplies wholeheartedly when it comes to shipping; their track record of delivering products on time and in good condition is commendable.
Lucas (verified owner) –
The shipping process with FarmHydroSupplies was flawless; my order arrived promptly and in perfect condition.