Quest Overhead Dehumidifier
Your indoor grow business may be taken to the next level with the correct dehumidification equipment. With the Quest Dehumidifier, you can say goodbye to crop losses caused by mould and other pests and welcome to optimal output.
The horizontal Quest Overhead Dehumidifier has a patent-pending dual outlet design and an insulated cabinet for quieter operation. These characteristics enable them to function admirably in practically every application. The Quest Dehumidifier is a plug-and-play device that requires no setup. Optional condensate pump and ducting kits can be added to give maximum flexibility for the most difficult space constraints and unique applications. These units come equipped with MERV-11 filtration, which captures particles (including mold spores) as small as 1 micron.
Higher Crop Yields, Less Problems
One of the biggest challenges for the indoor farming industry is creating and maintaining a stable, consistent environment for plants to flourish. Without a reliable climate, you could lose your entire crop. Once you lose control of your environment, serious crop-crushing issues begin to take hold. The two main “crop-crushers” are concerns many growers face at one time or another: powdery mildew and botrytis, more commonly known as bud rot. Either of these issues can destroy a grow and lead to lost revenue.
Proper Dehumidification Can Make All The Difference
Whether it’s a greenhouse or a hydroponic grow the same principles come into play when you’re fine-tuning a setup. For moisture control and dehumidification, the three most important aspects are proper sizing, placement, and airflow. Quest engineers developed our product offerings to allow for flexible and customizable options to address all three.
Notes: *Quest Overhead Hanging Bracket Included (Dual 110, 150)
Why use a Quest Dehumidifier?
The most energy-efficient dehumidifiers on the market
High capacity, high quality dehumidifiers with superior air filtration
The most complete humidity control product line
Superior U.S. technical support and service
- Quest Overhead Dehumidifier
- A full warranty on every Quest product
- Patented technology developed in Madison, Wisconsin

Quest Dehumidifier 70
Controlling humidity in compact, unconditioned commercial spaces presents unique challenges. Variable temperatures and constrained placement means you need a targeted solution. That’s where the Quest 70 comes in. This compact, economical, high performing dehumidifier has one of the widest temperature and relative humidity operating ranges we offer.
Quest 70 Specifications
| Water Removal 70 Pints/Day | Efficiency 5 Pints/kWh | Energy Factor 2.4 Liters/kWh | Current Draw 5.1 Amps |
| Power 680 Watts | BTU (Total) 5,000 | BTU (Heat) 3,000 | BTU (Motor Load) 2,000 |
| Water Removal 43 Pints/Day | Efficiency 3.3 Pints/kWh | Energy Factor 1.6 Liters/kWh | Current Draw 4.9 Amps |

Additional Specifications Quest 70
| Part Number 4033750 | Dehumidifier Type Refrigerant Dehumidifier | CFM 150 | Operating Temperature 33°-100° F |
| Supply Voltage 110–120 VAC, 1 Phase, 60 Hz | Unit Dimensions 12″ W x 12″ H x 21.5″ L | Unit Weight 55 lb | Control Type Onboard w/ low voltage terminal block |
| Air Filter MERV Rating MERV 13 | Air Filter Dimensions 9″ x 12″ x 1″ | Power Cord 110-120 VAC | Refrigerant Type R410A |
Refrigerant Amount15 oz | Drain Port Connection3/4″ Threaded NPT | Warranty5 Year |
Quest Dehumidifier 105
The Quest Dual 105 is the most energy efficient dehumidifier in its class: Using only 4.9 amps, the Quest Dual 105 removes 105 pints of water per day. It gives you the flexibility to hang the unit overhead or use ductwork and keep the dehumidifier in a different space entirely. Quest Overhead Dehumidifier
Quest 105 Specifications
| Water Removal 105 Pints/Day | Efficiency 8.8 Pints/kWh | Energy Factor 4.2 Liters/kWh | Current Draw 4.9 Amps |
| Power 530 Watts | BTU (Total) 6,600 | BTU (Heat) 5,000 | BTU (Motor Load) 1,600 |
| Water Removal 74 Pints/Day | Efficiency 7.2 Pints/kWh | Energy Factor 3.4 Liters/kWh | Current Draw 3.7 Amps |

Additional Specifications for Quest 105
| Part Number 4032270 | Dehumidifier Type Refrigerant Dehumidifier | CFM 257 | Operating Temperature 56°-95° F |
| Supply Voltage 110–120 VAC, 1 Phase, 60 Hz | Unit Dimensions 20.25″ W x 21.75″ H x 38″ L | Unit Weight 140 lb | Control Type Onboard w/ low voltage terminal block |
| Air Filter MERV Rating MERV 11 | Air Filter Dimensions 16″ x 20″ x 2″ | Power Cord 14ga NEMA 5-15P (10′) | Refrigerant Type R410A |
| Refrigerant Amount 1 lb 10 oz | Drain Port Connection 3/4″ Threaded NPT | Warranty 5 Year |
Quest Dehumidifier 110
The Quest Dual 110 is our smallest and lightest mid-size dehumidifier. It offers great water removal with easy portability — you can even hang it overhead — at an affordable price. The Quest Dual 110 removes more water using less electricity, and will last years longer than the competition.
Quest 110 Specifications
| Water Removal 110 Pints/Day | Efficiency 5.8 Pints/kWh | Energy Factor 2.8 Liters/kWh | Current Draw 7.4 Amps |
| Power 787 Watts | BTU (Total) 7,900 | BTU (Heat) 5,100 | BTU (Motor Load) 2,800 |

Additional Specifications for Quest 110
| Part Number 4034220 | Dehumidifier Type Refrigerant Dehumidifier | CFM 365 | Operating Temperature 56°-95° F |
| Supply Voltage 110–120 VAC, 1 Phase, 60 Hz | Unit Dimensions 14.5″ W x 19.4″ H x 26″ L | Unit Weight 85 lb | Control Type Onboard controls |
| Air Filter MERV Rating MERV 8 | Air Filter Dimensions 17.5″ x 14″ x 1.75″ | Power Cord 115 Volt Grounded Plug (10′) | Refrigerant Type R410A |
| Drain Port Connection 3/4″ Threaded NPT or 5/8″ Hose Barb | Warranty 5 Year |
Quest Dehumidifier 150
The Quest Dual 150 removes almost 20 gallons a day and is is our most powerful mid-sized overhead type dehumidifier. Dollar per pint, the Quest Dual 150 is the most affordable professional-quality dehumidifier on the market today. Like all Quest products, the Dual 150 is Assembled in Madison, Wisconsin using the very best components and materials available. Every one of our dehumidifiers comes with a 5 year warranty. Quest Overhead Dehumidifier
Quest 150 Specifications
| Water Removal 150 Pints/Day | Efficiency 4.8 Pints/kWh | Energy Factor 2.3 Liters/kWh | Current Draw 11.0 Amps |
| Power 1,300 Watts | BTU (Total) 10,500 | BTU (Heat) 6,700 | BTU (Motor Load) 3,800 |

Additional Specifications for Quest 150
| Part Number 4034230 | Dehumidifier Type Refrigerant Dehumidifier | CFM 430 | Operating Temperature 56°-95° F |
| Supply Voltage 110–120 VAC, 1 Phase, 60 Hz | Unit Dimensions 14.5″ W x 21″ H x 26″ L | Unit Weight 95 lb | Control Type Onboard controls |
| Air Filter MERV Rating MERV 8 | Air Filter Dimensions 17.5″ x 14″ x 1.75″ | Power Cord 115 Volt Grounded Plug (10′) | Refrigerant Type R410A |
| Drain Port Connection 3/4″ Threaded NPT or 5/8″ Hose Barb | Warranty 5 Year |
Quest Dehumidifier 155
The Quest Dual 155 is one of the most energy-efficient commercial dehumidifiers on the market today. Removing 155 pints of water per day, this unit can save you thousands in energy costs every year compared to the competition. It gives you the flexibility to hang the unit overhead or use ductwork and keep the dehumidifier in a different space entirely.
Quest 155 Specifications
| Water Removal 155 Pints/Day | Efficiency 7.3 Pints/kWh | Energy Factor 3.5 Liters/kWh | Current Draw 8 Amps |
| Power 920 Watts | BTU (Total) 10,500 | BTU (Heat) 7,600 | BTU (Motor Load) 2,900 |
| Water Removal 116 Pints/Day | Efficiency 6.1 Pints/kWh | Energy Factor 2.9 Liters/kWh | Current Draw 7.1 Amps |

Additional Specifications for Quest 155
| Part Number 4031490 | Dehumidifier Type Refrigerant Dehumidifier | CFM 391 | Operating Temperature 56°-95° F |
| Supply Voltage 110–120 VAC, 1 Phase, 60 Hz | Unit Dimensions 20.25″ W x 21.75″ H x 38″ L | Unit Weight 140 lb | Control Type Onboard w/ low voltage terminal block |
| Air Filter MERV Rating MERV 11 | Air Filter Dimensions 16″ x 20″ x 2″ | Power Cord 14ga NEMA 5-15P (10′) | Refrigerant Type R410A |
| Refrigerant Amount 1 lb 13 oz | Drain Port Connection 3/4″ Threaded NPT | Warranty 5 Year |
Quest Dehumidifier 165
At only 3.6 amps, the Quest Dual 165 is one of the most energy-efficient commercial dehumidifiers on the market today.Removing 165 pints of water per day, this unit saves thousands in energy costs every year compared to the competition.Designed with the flexibility to hang overhead or ducted. Quest Overhead Dehumidifier
Quest 165 Specifications
| Water Removal 165 Pints/Day | Efficiency 7.8 Pints/kWh | Energy Factor 3.7 Liters/kWh | Current Draw 3.6 Amps |
| Power 860 Watts | BTU (Total) 9,900 | BTU (Heat) 7,100 | BTU (Motor Load) 2,800 |
| Water Removal 112 Pints/Day | Efficiency 6.3 Pints/kWh | Energy Factor 3.0 Liters/kWh | Current Draw 3.1 Amps |

Additional Specifications for Quest 165
| Part Number 4037410 | Dehumidifier Type Refrigerant Dehumidifier | CFM 526 | Operating Temperature 56°-95° F |
| Supply Voltage 220–240 VAC, 1 Phase, 60 Hz | Unit Dimensions 20.25″ W x 21.75″ H x 38″ L | Unit Weight 140 lb | Control Type Onboard w/ low voltage terminal block |
| Air Filter MERV Rating MERV 11 | Air Filter Dimensions 16″ x 20″ x 2″ | Power Cord NEMA 6-15P (10′) | Refrigerant Type R410A |
| Refrigerant Amount 2 lb | Drain Port Connection 3/4″ Threaded NPT | Warranty 5 Year |
Quest Dehumidifier 205
The Quest Dual 205 is our highest capacity 115V dehumidifier.Using 13.2 amps, the Dual 205 removes 205 pints of water per day while running 46% more efficiently than Energy Star standards. It gives you the flexibility to hang the unit overhead or use ductwork and keep the dehumidifier in a different space entirely.
Quest 205 Specifications
| Water Removal 205 Pints/Day | Efficiency 5.7 Pints/kWh | Energy Factor 2.7 Liters/kWh | Current Draw 13.2 Amps |
| Power 1,525 Watts | BTU (Total) 14,300 | BTU (Heat) 9,200 | BTU (Motor Load) 5,100 |
| Water Removal 128 Pints/Day | Efficiency 3.9 Pints/kWh | Energy Factor 1.8 Liters/kWh | Current Draw 11.8 Amps |

Additional Specifications for Quest 205
| Part Number 4033060 | Dehumidifier Type Refrigerant Dehumidifier | CFM 526 | Operating Temperature 56°-95° F |
| Supply Voltage 110–120 VAC, 1 Phase, 60 Hz | Unit Dimensions 20.25″ W x 21.75″ H x 38″ L | Unit Weight 150 lb | Control Type Onboard w/ low voltage terminal block |
| Air Filter MERV Rating MERV 11 | Air Filter Dimensions 16″ x 20″ x 2″ | Power Cord 14ga NEMA 5-20P (10′) | Refrigerant Type R410A |
| Refrigerant Amount 2 lb | Drain Port Connection 3/4″ Threaded NPT | Warranty 5 Year |
Quest Dehumidifier 225
The Dual 225 was built to answer the voltage concerns of commercial users. Almost as efficient as our Dual 155 model, the Quest Dual 225 is a favorite among those who choose the higher voltage route. Like all Quest products, the Dual 225 is Assembled in Madison, Wisconsin using the very best components and materials available. Quest Overhead Dehumidifier
Quest 225 Specifications
| Water Removal 225 Pints/Day | Efficiency 6.1 Pints/kWh | Energy Factor 2.9 Liters/kWh | Current Draw 6.9 Amps |
| Power 1,500 Watts | BTU (Total) 15,500 | BTU (Heat) 10,300 | BTU (Motor Load) 5,200 |
| Water Removal 143 Pints/Day | Efficiency 4.4 Pints/kWh | Energy Factor 2.1 Liters/kWh | Current Draw 6.3 Amps |

Additional Specifications for Quest 225
| Part Number 4035400 | Dehumidifier Type Refrigerant Dehumidifier | CFM 526 | Operating Temperature 56°-95° F |
| Supply Voltage 220–240 VAC, 1 Phase, 60 Hz | Unit Dimensions 20.25″ W x 21.75″ H x 38″ L | Unit Weight 160 lb | Control Type Onboard w/ low voltage terminal block |
| Air Filter MERV Rating MERV 11 | Air Filter Dimensions 16″ x 20″ x 2″ | Power Cord 14ga NEMA 5-20P (10′) | Refrigerant Type R410A |
| Refrigerant Amount 2 lb | Drain Port Connection 3/4″ Threaded NPT | Warranty 5 Year |
Quest Dehumidifier 335
The Quest 335 is engineered specifically for commercial cannabis growers facing the heavy workload of grow houses filled with moisture-producing crops. At the core of Quest’s 335 is a pressure switch connected to a variable speed fan. When the switch detects a change in pressure (primarily due to a dirty filter), the fan slowly ramps up its speed to maintain the desired CFM, which results in consistent humidity control. The Quest 335 uses a multi-coil design similar to the one used in the Quest 506. The end result is 335 pints of water pulled from the air every 24 hours at 80F and 60% relative humidity at 9.3 KWh.
Quest 335 Specifications
| Water Removal 350 Pints/Day | Efficiency 9.3 Pints/kWh | Energy Factor 4.3 Liters/kWh | Current Draw 9A @208V / 7.5A @230V |
| Power 1,565 Watts | BTU (Total) 20,300 | BTU (Heat) 15,200 | BTU (Motor Load) 5,100 |
| Water Removal 233 Pints/Day | Efficiency 6.7 Pints/kWh | Energy Factor 3.2 Liters/kWh |

Additional Specifications for Quest 335
| Part Number 4042500 | Dehumidifier Type Refrigerant Dehumidifier | CFM 900 | Operating Temperature 56°-95° F |
| Supply Voltage 208–230 VAC, 1 Phase, 60 Hz | Unit Dimensions 32.9″ W x 23.7″ H x 24.6″ L | Unit Weight 215 lb | Control Type Onboard w/ low voltage terminal block |
Air Filter MERV RatingMERV 13 | Air Filter Dimensions20″ x 22″ x 2″ | Power Cord14ga NEMA 6-15P (10′) | Refrigerant TypeR410A |
Refrigerant Amount4 lb 12 oz | Drain Port Connection3/4″ Threaded NPT | FansVariable speed EC Motor | Warranty5 Year |
Quest Dehumidifier 335 277 Volt
The NEW 335 277V dehumidifiers offer the same quality and features as our original Quest 335 208/230V units, but rather offer 277V voltages for use in industrial facilities. The 277V unit is a great fit for grow rooms, many of which traditionally have 277V outlets already installed for lighting. In such case the 277V unit eliminates the need for additional installation of buck-boost transformers and associated costs of wiring. Additionally, these higher voltage units use less amperage, freeing up electricity for other equipment in the grow room.
Both Quest 335 units (208/230V and 277V) boasts our unique patent pending multi-coil design that provides the highest efficiencies available on the market. They also feature Quest’s filter compensation technology, which increases fan speed as the filter becomes increasingly clogged with pollen, powdery mildew and dirt. This speed adjustment allows for the same amount of air to pass through the filter without reducing the cubic feet for minute (CFM). As a result, the Quest 335 is able to work consistently and constantly to optimize your grow room environment with maximum energy efficiency and consistency. Quest Overhead Dehumidifier
Quest 335 277 Volt Specifications
| Water Removal 350 Pints/Day | Efficiency 8.5 Pints/kWh | Energy Factor 4 Liters/kWh | Current Draw 6.8 Amps |
| Power 1,789 Watts | BTU (Total) 21,900 | BTU (Heat) 15,900 | BTU (Motor Load) 6,000 |
| Water Removal 230 Pints/Day | Efficiency 6.2 Pints/kWh | Energy Factor 2.9 Liters/kWh | Current Draw 6 Amps |

Additional Specifications for Quest 335 277 Volt
| Part Number 4042600 | Dehumidifier Type Refrigerant Dehumidifier | CFM 900 | Operating Temperature 56°-95° F |
| Supply Voltage 277 | Unit Dimensions 32.9″ W x 23.7″ H x 24.6″ L | Unit Weight 215 lb | Control Type Onboard w/ low voltage terminal block |
| Air Filter MERV Rating MERV 13 | Air Filter Dimensions 20″ x 22″ x 2″ | Power Cord NEMA L7-15P (10′) | Refrigerant Type R410A |
| Refrigerant Amount 4 lb 12 oz | Drain Port Connection 3/4″ Threaded NPT | Fans Variable speed EC Motor | Warranty 5 Year |
Quest Dehumidifier 506
Powerful and efficient, the Quest 506 is the industry’s first 500-pint dehumidifier and is perfect for agricultural applications as well as tough commercial spaces. Its 506 pint capacity makes it one of the most powerful commercial dehumidifiers on the market. Commonly used in indoor growing facilities, greenhouses, warehouses and other large industrial areas, the 506 dehumidifier is available for a variety of uses and installations. This Quest dehumidifier is proudly Assembled in Madison, Wisconsin, can be hung or placed on the floor, and offers an impressive MERV 13 filtration system.
Quest 506 Specifications
| Water Removal 506 Pints/Day | Efficiency 8.1 Pints/kWh | Energy Factor 3.8 Liters/kWh | Current Draw 11 Amps |
| Power 2,700 Watts | BTU (Total) 31,000 | BTU (Heat) 22,500 | BTU (Motor Load) 8,500 |
| Water Removal 349 Pints/Day | Efficiency 6.2 Pints/kWh | Energy Factor 2.9 Liters/kWh | Current Draw 10.2 Amps |

Additional Specifications for Quest 506
| Part Number 4036600 | Dehumidifier Type Refrigerant Dehumidifier | CFM 1,500 | Operating Temperature 56°-95° F |
| Supply Voltage 220–240 VAC, 1 Phase, 60 Hz | Unit Dimensions 30.1″ W x 33.8″ H x 44.8″ L | Unit Weight 280 lb | Control Type Requires External Control |
| Air Filter MERV Rating MERV 13 | Air Filter Dimensions 18″ x 20″ x 2″ | Power Cord 12ga NEMA 6-20P (10′) | Refrigerant Type R410A |
| Refrigerant Amount 4 lb 8 oz | Drain Port Connection 3/4″ Threaded NPT | Warranty 5 Year |
Quest Dehumidifier 506 277 Volt
Powerful and efficient, the Quest 506 277V dehumidifier achieves highest efficiencies available in the market. Just like our original 506 230V units, the 506 pint capacity makes it one of the most powerful commercial dehumidifiers on the market. The new 277V voltage provides low amp draw, freeing up electricity for other equipment. Best of all these units can be installed on 277V without the additional installation of buck-boost transformers and the associated costs of wiring. Quest Overhead Dehumidifier
Quest 506 277 Volt Specifications
| Water Removal 506 Pints/Day | Efficiency 8.1 Pints/kWh | Energy Factor 3.8 Liters/kWh | Current Draw 10 Amps |
| Power 2,700 Watts | BTU (Total) 31,900 | BTU (Heat) 23,000 | BTU (Motor Load) 8,900 |
| Water Removal 349 Pints/Day | Efficiency 6.2 Pints/kWh | Energy Factor 2.9 Liters/kWh | Current Draw 10.2 Amps |

Additional Specifications for Quest 506 277 Volt
| Part Number 4036610 | Dehumidifier Type Refrigerant Dehumidifier | CFM 1,350 @ 0.0 WG | Operating Temperature 56°-95° F |
| Supply Voltage 277 Volt | Unit Dimensions 30.1″ W x 33.8″ H x 44.8″ L | Unit Weight 280 lb | Control Type Requires External Control |
| Air Filter MERV Rating MERV 13 | Air Filter Dimensions 18″ x 20″ x 2″ | Power Cord NEMA L7-20P | Refrigerant Type R410A |
Refrigerant Amount4 lb 8 oz | Drain Port Connection3/4″ Threaded NPT | Warranty5 Year |
Quest Dehumidifier 746
The new Quest 746 480V dehumidifier boasts our patented multi-coil design which provides industry leading efficiencies. This new unit with higher voltages uses less amperage, freeing up electricity for other equipment.
Quest 746 Specifications
| Water Removal 746 Pints/Day | Efficiency 7.3 Pints/kWh | Energy Factor 3.5 Liters/kWh | Current Draw 6.5 Amps |
| Power 4,266 Watts | BTU (Total) 48,400 | BTU (Heat) 33,900 | BTU (Motor Load) 14,500 |
| Water Removal 530 Pints/Day | Efficiency 5 Pints/kWh | Energy Factor 2.4 Liters/kWh | Current Draw 6.25 Amps |

Additional Specifications for Quest 746
| Part Number 4037610 | Dehumidifier Type Refrigerant Dehumidifier | CFM 1,750 | Operating Temperature 56°-95° F |
| Supply Voltage 480V | Unit Dimensions 29″ W X 33.8″ H X 44.8″ L | Unit Weight 340 lb | Control Type Requires External Control |
| Air Filter MERV Rating MERV 13 | Air Filter Dimensions 18″ x 20″ x 2″ | Power Cord Hardwire Only | Refrigerant Type R410A |
| Refrigerant Amount 6 lb 7 oz | Drain Port Connection 3/4″ Threaded NPT | Warranty 5 Year |
Quest Dehumidifier 876
Powered by patented coil technology that isn’t available anywhere else, the Quest 876 is designed to work round-the-clock with maximum energy efficiency and flexibility. Like all Quest products, the Quest 876 is Assembled in Madison, Wisconsin using the very best components and materials available. Quest Overhead Dehumidifier
Quest 876 Specifications
| Water Removal 876 Pints/Day | Efficiency 6.6 Pints/kWh | Energy Factor 3.1 Liters/kWh | Current Draw 24.7 Amps |
| Power 5,500 Watts | BTU (Total) 58,200 | BTU (Heat) 39,600 | BTU (Motor Load) 18,600 |
| Water Removal 614 Pints/Day | Efficiency 5.2 Pints/kWh | Energy Factor 2.5 Liters/kWh | Current Draw 22.4 Amps |

Additional Specifications for Quest 876
| Part Number 4037600 | Dehumidifier Type Refrigerant Dehumidifier | CFM 1,850 | Operating Temperature 56°-95° F |
| Supply Voltage 220–240 VAC, 1 Phase, 60 Hz | Unit Dimensions 29″ W X 33.8″ H X 44.8″ L | Unit Weight 350 lb | Control Type Requires External Control |
| Air Filter MERV Rating MERV 13 | Air Filter Dimensions 18″ x 20″ x 2″ | Power Cord Hardwire Only | Refrigerant Type R410A |
| Refrigerant Amount 4 lb 8 oz | Drain Port Connection 3/4″ Threaded NPT | Warranty 5 Year |









Reviews
There are no reviews yet.