Trimpro Drypro Dry Trimming Machine
User Instructions
- Carefully read the security instructions (General Warnings) before using the machine
- Plug the machine into an electrical outlet
- Turn on the machine using the Forward (FWD) (A) switch
- Fill the upper container (B) with dried plants (between 8-12% humidity) without branches
- Adjust the motor dimmer (C) at MAX and adjust accordingly
- Set the timer (D) to desired time according to volume and strain of the plants
- Let the plants move around in the machine according to desired time or until the desired cut is obtained
- Adjust the brushes (K) angle accordingly with side screw handles (L)
- Open the exit door (E) and turn the switch to Reverse (REV) until upper contaienr is empty
- Remove frequently the accumulation of trim in the bottom tray (F) so it does not obstruct the motors ventilation
- Turn off the machine using then STOP swtich (A) and by turning off the timer (D)
- Unplug the machine from the electrical outlet
Drypro Dry Trimmer from Trimpro
The Trimpro Drypro Dry Trimmer was created in response to producer requests for yet another gentle, efficient, and high-quality TRIMPRO device suited for people who want to dry their flowers before trimming.
Leaves are trimmed by the movement of stainless steel grates on each other, which is powered by an adjustable-speed motor. With a cutting capacity of up to 12 lbs/hr, it has one of the greatest returns on the market. Because of its slanted design and closed front gate, recovery is exceptionally straightforward, allowing precisely cut flowers to escape the top cylinder while the machine is still working.
The ideal moisture level for dry trimming is around 11%. Trimpro Drypro Dry Trimming Machine
Specifications
Features:
- Variable Speed
- Gentle, Quiet, & Efficient
- East to Use & Easy to Clean
- Trims up to 12 lbs/hr.
- Another Quality Trimpro Product
Multiple speeds allow you to find the perfect blade speed optimal for the size of your trim. The two brushes are used to move buds that are stuck on top to the bottom so that each bud comes in contact with the blades assuring an even trim for the entire batch.
The Drypro Trimmer is not only quiet, gentle and efficient, but it is also simple to clean. All the individual parts of the trimmer are listed in the diagram below so that you know every single piece that goes into the machine. There are also instructions on how to clean your Drypro Trimmer. Cleaning all parts after each trim will help assure your machine is in tip top shape after each job and before the next job.
The Drypro Trimmer dimensions are 1.5 ft. (18 in.) by 1.5 ft. (18 in.) on the base and sits 2 ft. (24 in.) high

Materials
- Grates & cylinder : Stainless steel (slot size 1/4″)
- Body: Powder coated aluminium
- Arms: Polyethylene FDA approved
- Brushes: Nylon FDA approved
- Tray: Polyethylene FDA approved HMWPE
- Forward & Reverse switch
- Timer
- Trimpro Drypro Dry Trimming Machine
Technical
- Speed: 30 rpm
- Amps: 0.5 Amps
- Voltage: 110 Volt
- Wattage: 25 Watts
- Capacity: 12 lbs/hr. or 5.5 Kg/hr.
- Weight: 48 lbs. (21.8 Kg)
- Dimensions: 18″ x 18″ x 24″ (LxWxH)
Trimmer Part Diagram


General Warnings
- Never place your fingers, gloves or any other body part in contact with the grate or the blade.
- Never apply pressure on the grate.
- Do not use scissors, knives or any instrument above the grate.
- Safety glasses and gloves are required at all time.
- The gloves have to be tight enough so they don’t get inside the grate slots. A loose glove is dangerous. BE AWARE!
- Trimpro Drypro Dry Trimming Machine
Cleaning Instructions
In order to facilitate the trimming, clean both grates frequently with isopropyl alcohol. This must be done when the machine is not running
- Turn the machine switch to STOP (A)
- Remove the hood fastener (G) from the upper container
- Remove the upper container (B)
- Untighten the center screw (H) to remove the central hub (I) and the top grade (J) from the motor shaft
- Remove the top grate (J) with both hands so it does not bend












Mateo (verified owner) –
Working with FarmHydroSupplies for the past few months has been a pleasure; not only do they offer top-notch hydroponic products, but their shipping services are reliable and efficient.
Daniel (verified owner) –
The shipping process with FarmHydroSupplies was flawless; my order arrived promptly and in perfect condition.
Christian (verified owner) –
I trust FarmHydroSupplies wholeheartedly when it comes to shipping; their track record of delivering products on time and in good condition is commendable.
Isaac (verified owner) –
FarmHydroSupplies has consistently impressed me with their shipping services; they ensure secure packaging and timely delivery every time.
Dominic (verified owner) –
FarmHydroSupplies has built a strong reputation for delivering products on time, intact, and without any hassles.
Leo (verified owner) –
FarmHydroSupplies exceeded my expectations with their shipping services; the packaging was secure, and my hydroponic products arrived intact.