Covert Carbon Air & Odor Filters
The Perfect Filter Solution – Covert Carbon Filters
Covert Carbon Filters are the solution to effectively remove unwanted odors and smells from your garden.
Useful for removing odor and enhancing the quality of the air in grow tents, grow rooms, or any other enclosed growing environment. Any undesirable molds, spores, dust, pollen, smells, and other particles that might harm your plants will be purified and filtered out by Covert Carbon Filters.
The 50mm thick bed of virgin activated low density carbon used in Cover Carbon Filters is properly packed for uniform airflow while increasing the carbon’s surface area to more readily bind to and absorb odor-causing particles.
Lightweight stainless steel mesh construction forces air to penetrate the packed carbon bed in a uniform distribution.

Activated carbon filters are the best way to eliminate most VOCs (Volatile Organic Compounds), gasses, and odors from the air. Combined with a fan in a ventilation system, 99.9% of noxious odors can be trapped inside the filter for good.
Through adsorption, activated carbon literally traps the carbon-based contaminants in the air that could harm you and keep them locked tight inside the filter. Using activated carbon ensures optimal pore structure and that the pathways the air travels through the filter are optimal, so that the maximum amount of contaminant becomes trapped in the filter and does not escape into the air. Covert Carbon Air & Odor Filters
Features:
- Machine packed activated virgin carbon allows for maximum air scrubbing
- Highly effective, low density virgin carbon
- 50mm carbon bed ensures all air is cleaned
- Inner and outer mesh provides 53% open area allowing increased air flow
- Built-in flange
- Includes pre-filter for prolonged filter life
- Lightweight construction allows for easy hanging
- No maintenance required
Long life span (12-18 months)
All Covert Filters come with a reusable pre-filter that will filter out the large particles before they enter the carbon bed which significantly extends the life of the virgin activated carbon.
Covert Filters have a built-on flange that is easy to attach to ducting or an inline fan. The lightweight and compact design makes for easy hanging and saves space.
Need to learn more about odor control for your garden?
Check out this article on – Grow Room Odor Control
Covert Inline Fans can also be purchased in an entire kit.
We’ve paired the Covert Inline Fan with all the essential tools you will need for odor control in your garden so that nothing is forgotten about.
Check out the different kit options here
Covert Ventilation and Odor Control Kit
This kit includes:
- Covert Carbon Filter – View Here
- Covert Inline Fan
- Variable Fan Speed Controller
- Covert Carbon Air & Odor Filters
- Ducting with Duct Clamps
How to hang your Covert Carbon Filter
Once you have your Covert Filter, you still need to ensure that it gets set up properly for maximum efficiency.
We’ve done our best to provide all the learning resources you may require in our Learning Center on how to properly install your Covert Carbon Filter.
This article – Grow Tent Setup Guide – goes over the entire process of setting up your grow tent. At Step 4 & Step 5 in this article we highlight different ventilation setup methods and what we prefer as well as every step required to properly install your filter.


Special Ventilation Setups
Air-Cooled Lighting
Air-cooled HID light fixtures have duct flanges you can easily connect a fan and ducting to. You can see an example setup in the diagram to the right. This setup pulls air through the carbon filter, then through the light fixture and finally out of the tent.
A great upgrade for air-cooled lighting is to use a separate in-line fan just for the lighting ventilation. This will make both your light cooling and your carbon filter work more efficiently.
Great information can be found here
Grow Room Atmosphere & Ventilation
Covert Carbon Air & Odor Filters
Closed Loop CO2 Ventilation
When using CO2 producing equipment inside of a tent, you want to avoid allowing that CO2 to exhaust from the tent. Therefore you want a “closed loop” system which will filter the air of odors by recirculating the air in the tent through a fan and filter. It is recommended to utilize LED or aircooled lighting to avoid heat buildup in the tent. Air conditioning is recommended for larger tents using CO2
Using CO2 for a grow tent is a more advanced technique. If you want to leanrn more about CO2 for growing we have a great article here
CO2 for Grow Tents




These images showcase different combinations of ventilation setups and how it might look in a tent of your own. There are tons of different methods to experiment with in your grow tent to get the most out of your garden every time you grow!
We want you to get the most out of your grow and knowledge is power! It is encouraged to check out this article on Indoor Grow Room & Grow Tent Ventilation Setup Tips. We’ve compiled all the essential information on ventilation here so that every grow room/tent, big or small, has been properly setup to achieve the best results possible. Covert Carbon Air & Odor Filters
Covert Carbon Filters come in 3 sizes
| Size: | Covert 4″ x 12″ |
|---|---|
| Flange: | 4 in. |
| CFM: | 200 CFM |
| Dimensions: (LxWxH) | 7.9″x7.9″x15″ |
| Grow Tent Sizes: | 2′ x 2′ 2′ x 4′ 3′ x 3′ |
| Covert 6″ x 20″ | Covert 8″ x 24″ |
|---|---|
| 6 in. | 8 in. |
| 450 CFM | 750 CFM |
| 10″x10″x23″ | 12″x12″x27″ |
| 4′ x 4′ 4′ x 8′ 5′ x 5 | 8′ x 8′ 10′ x 10′ |


















Reviews
There are no reviews yet.