TrolMaster Legacy BETA-8 Digital CO2 PPM Controller
The TrolMaster BETA-8CO2 PPM Controller is a simple and affordable way to control your CO2 injection device.
Choose your preferred CO2 parts per million (PPM) level, and the controller will automatically maintain that level. Throughout the night, a built-in photocell on the remote sensor automatically deactivates CO2 injection. A remote sensor with a 16-foot cable allows for close proximity to the plant canopy.
In the night mode: The controller will always turn off the output of CO2 device.
In the day mode:
A)If the fuzzy logic is off the unit will OPEN the output of CO2 device when the current CO2 value is less than the setpoint. The unit will CLOSE the output of CO2 device is the current CO2 value is greater than the CO2 setpoint plus dead band value.
If the fuzzy logic is on, the unit will fully OPEN the output of CO2 device when the current CO2 value is much lower than the CO2 setpoint. When the current CO2 value is close to the CO2 setpoint, the unit will use fuzzy logic function and sent the PWM (Pulse Width Modulation) signal to control the output of the CO2 device. The PWM cycle is 5 seconds.
Features:
- Built-in Photocell detecting day and night status
- LED screen display simple to operate
- Alternative Humidifying or Dehumidifying Function
- TrolMaster Legacy BETA-8 Digital CO2 PPM Controller
- CO2 sensor with 16′ cable for close placement to the plant canopy
- 3 year warranty
Specifications:
| Input Voltage: | 120 Volts AC |
| Output Relay Rating: | 10A |
| Fuse Rating: | 6A/250V~ |
| AC Power Cord Length | 1.8m |
| CO2 Control Range: | 400-2000 PPM |
| CO2 Deadband: | 20-200 PPM |
| CO2 Accuracy: | ±50 PPM |
| CO2 Sensor Type: | NDIR (Nondispersive Infrared) |
| Packaging Dimensions: | 275mm(L) x 87mm(W) x 94mm(H) |
| Gross Weight: | 0.56kgs |








Reviews
There are no reviews yet.