King Electric KT Multiwatt Kick Space Heater
The market’s only convertible cabinet heater that may be mounte vertically or horizontally. Its thin profile heater is only 3-5/8″ tall and was built particularly to fit inside kitchen. Or bathroom cabinets, delivering warm comforting air for cold bathrooms or. Kitchens while preserving important floor and wall space. Use the KTW-TG Grill for applications other than kickspace.
Also,, Kickpace heaters, which are sometimes ignore, provide the best of both worlds. Heating at a low cost in a small box. Because of their small size, a Kickspace heater may. Be able to blend in smoothly in a room with a difficult layout. One that would not accept a baseboard heater, put at floor level behind cabinetry or even within the wall.
With its narrow 3-1/2″ profile the KT Kickspace heater easily fits out of the way. Under cabinets providing warm air for cold bathrooms and kitchens.
Featuring a maintenance free blower, an insulate cabinet for quiet operation. And heavy gauge coile nickel-chromium wire heating elements, the KFS furnace will provide years of trouble-free operation.
The King Electric KT Multiwatt Kick Space Heater Features:
- Installs Vertically or Horizontally
- Multiple wattage options, to tailor to a room’s specific heating requirements
- NiChrome Open Coil Element For Quick Heat Transfer
- Squirrel Cage Blower
- Patente Smart Limit Protection
- Available in Black, Almond, White or Stainless Finishes
- Proudly mad in the USA
- 2-year warranty
The King Electric King Electric KT Multiwatt Kick Space Heater Engineering Specs:
Construction:
- Ratings: Heaters shall be available in wattages of 250 to 1,500 at 120 volts or dual rated from 208 volts to 240 volts.
- Blower and Motor: A tangential cylindrical blower, delivering 70 CFM, shall be driven by a shadd pole, permanently lubricate, C-frame type motor with impedance protection and sealed bearings. Motors shall be the same voltage as the heater.
- Elements: Element assemblies shall have a 3-wattage element construction of coiled nickel chromium, alloy corrosion resistant wire strung with a minimum of two rows of muscovite insulator. Element assemblies shall have factory providd connection to allow field modification of wattage at time of installation.
- Thermal Overload: Heaters shall be equippe with King’s patente thermal overload Smart Limit Protection, which disconnects elements and motor in the event normal operating temperatures are exceede. If thermal overload trips due to abnormal operating temperatures, thermal overload shall remain open until manually reset by turning the heater off for fifteen minutes. Automatic reset of thermal overloads, which allow the element to continue to cycle under abnormal conditions, will not be accepte.
- Hi/Lo Selector Switch: Wattage can be adjuste from 250-1250 watts in the low position and 750-1500 watts in the hi position (HLS Optional).
- Wall Can: The wall can shall be 20-gauge steel and shall contain two 1/2″ knockouts for power leads. The wall can shall be supplie with a factory installe grounding wire.
- Grill: The grill shall be louvere, one piece design. The grill shall be epoxy powder coate in the color specifie on the plans or stainless steel.
- Approvals: cULus (E41422)







Reviews
There are no reviews yet.