Quest Hi-E Dry Dehumidifier
Quest HI-E Drydehumidifiers can be used standalone or in ducted installations.
Get the flexibility you need in an economical package with the Hi-E DRY 120 or 195 Dehumidifiers.
Note: The Quest Hi-E Dry does NOT INCLUDE communication wires and CAN’T be wired to a humidistat
Also, Hi-E DRY dehumidifiers are developed and manufactured with efficiency and durability in mind. Hi-E DRY dehumidifiers can remove up to seven pints of water per kilowatt hour, compared to the industry average of two to three pints.
Furher, Hi-E DRY dehumidifiers’ high-efficiency design provides more than just significantly lower utility expenses. In many situations, the increased water removal capacity of a smaller, more efficient refrigeration system removes the requirement for 220 volt lines. Because of the smaller refrigeration system, Hi-E DRY 120 & 195 dehumidifiers are less expensive than comparable commercial dehumidifiers.
Secondly, The Hi-E DRY high efficiency dehumidifier utilizes refrigeration to cool the incoming air stream below its dew point as it passes through the dehumidification (evaporator) coil. This cooling results in the removal of moisture (latent heat) and reduction in temperature (sensible heat). Here, The cooled and dried air is used to precool the incoming air stream resulting in up to a 200 percent increase in overall efficiency. After the precooling stage the processed air is reheated by passing through the condenser coil. The latent heat removed by the evaporator coil is returned to the air stream at this stage as sensible heat, resulting in an overall temperature increase from the incoming air. Quest Hi-E Dry Dehumidifier
Features & Benefits of the Hi-E Dry
- Controlled by a dehumidistat with settings from 20 to 80 percent relative humidity and a positive “on” and “off” setting.
- Portable and provided with four casters.
- Contains an internal condensate pump capable of lifting condensate 17 feet and 20 ft(195)/30 ft(120) of condensate hose.
- Wiring is through a factory installed six foot power cord; 115 volt with ground.
Specifications
| Model: | Hi-E Dry 120 |
|---|---|
| Supply Voltage: | 115 VAC 5.9 amps – NEMA 5-15P |
| Power: | 680 Watts @ 80°, 60% |
| Water Removal: | 120 pints (80°, 60%) |
| Blower: | 445 CFM |
| Operating Range: | 40°F–110°F |
| Dimensions: | 20″ x 42″ x 19″ | 121 lbs. |
| Shipping Dimensions: | 26″ x 47″ x 24″ | 145 lbs |
| Warranty: | 5 Years |
| Model: | Hi-E Dry 195 |
|---|---|
| Supply Voltage: | 115 VAC 13.1 amps – NEMA 5-20P |
| Power: | 1500 Watts @ 80°, 60% |
| Water Removal: | 195 pints (80°, 60%) |
| Blower: | 610 CFM |
| Operating Range: | 40°F–110°F |
| Dimensions: | 20″ x 42″ x 19″ | 130 lbs. |
| Shipping Dimensions: | 26″ x 47″ x 24″ | 145 lbs |
| Warranty: | 5 Years |












Reviews
There are no reviews yet.